HDMI wireless video transmitter 30M Support 3D 1080P WHDI Video/Audio Signal Transmission System By ShenZhen YouTing technology Co., LTD, China
Pas encore membre de TradeKey.com? Inscrivez-vous pour vous connecter avec 9 millions d'importateurs et exportateurs. Rejoignez-le maintenant c'est gratuit |
BOOK A CALL
Book Call On Your Favorite Time

By Signing Up. I agree to TradeKey.com Terms of Use, Privacy Policy, IPR and receive emails related to our services

Contact Us
HDMI wireless video transmitter 30M Support 3D 1080P WHDI Video/Audio Signal Transmission System

HDMI wireless video transmitter 30M Support 3D 1080P WHDI Video/Audio Signal Transmission System

190 ~ 220 / Set

|

Minimum Order

Localité:

-

Prix de commande minimale:

Commande minimale:

10 Set

Packaging Detail:

carton box

Delivery Time:

within 20 days

Supplying Ability:

5000 Set per Month

Payment Type:

T/T

Contacter maintenant
Membre gratuit

Personne à contacter Tiger

Shenzhen, Guangdong

Contacter maintenant

Description

support 3D HDMI1.4 HDCP2.0

***0p ***0i **0p

With a transmission distance of *5m without latency

Remote control

Compatible design
 
 

 Product specifications

 
 
 

Model

 

YT-W**0T

 

YT-W**0R

 

Supported Resolution

 

***0p   ***0i **0p

 

HDMI Interface

 

Support HDMI1.4A video/audio format and encrypted   video format HDCP2.0

 

Transmission Distance

 

*5m without obstacles

 

System   Latency

 

<1 ms

 

Antenna

 

Omni bearing built-in antenna

 

Power

 

**0~ **0V alternating input current, 5V 3A direct current output power adaptor

 

Certificates

 

FCC CE

 

standard

 

WHDI 1.0

 

Supported interface

 

3.5mm plug,built out infrared remote control connector

 

Built in infrared receiving area

 

Working temperature

 

0℃ - *0℃

 

Dimension

 

**6(L)**3(W)**5(H)mm


 

 

 Product Feature

 

-  Working frequency: 4.9Hz~ 5.9 GHz

-  YTS function

-  Compatible design

-  Built-in antenna

-  With a transmission distance of *5m without latency

-   Remote control

-   Support 3D effect

 

Troubleshooting

 

   Please make sure all the devices is properly connected and receiver is not in standby mode before you follow the troubleshooting guide below.

 
 
 

No video

 

1,   Check the status of LED, and check if the HD   media player works normally.


 
 

2. Check if the joints and wires are   damaged and make sure they are correctly connected to corresponding   interface

 

2,   3. Ensure there is video on   output devices.

 

3,   4. Check the receiver is   correctly connected to display equipment

 

4,   5. Make sure all devices are   working on supported distance. Draw them closer and try it again.

 

 




 

 

Power LED off

 

1,  Make sure the power adaptor is   correctly connected and the voltage is 5V3A

 

2,  Make sure the power supply would   not be interrupted.

 

3,  Make sure transmitter is fully   powered.

 

Receiver video indicating LED abnormal

 

1,  Make sure video and audio   signals can be transmitted to receiver successfully.

 

2,  If there are video and audio   signal on output devices, please check the indicating LED to see if something   got wrong with it.

 

3,  Make sure the device is working   within the supported distance.

 

 




 

 

Bad   picture

 

1. Ensure there is video on output devices

 

2. Check if the receiver is correctly   connected to display equipment and there is no damage on joints and wires.

 

3. Make sure all devices are working on   supported distance. Draw them closer and try it again.

 

No sound or bad sound

 

1. Restart the transmitter and connect it   again

 

2. Make sure there is no disturbance from   the same frequency (4.9~5.9GHz)within 1 meter.

 

Register failure

 

1.      Make sure the amount of registered source devices on display   equipment is less than 8.

 

2.      Ensure the distance between transmitter and receiver doesn't exceed   supported distance. If it does, make them closer and try it again.

 

Check if source device has been added on display   equipment. If it has, delete it and make registration again.

 

Connection failure

 

1.      Ensure the working distance doesn't exceed supported distance. If it   does, make them closer and try it again

 

2.      Make sure source devices have been registered every time after   software update.

 

3.      Ensure source devices and display devices have been registered.

 

4. If failure occurs again, delete all registered information and try   it again.

 

Other problems

 

If any other problems occur, please restart   the device and make connections again.

Send a direct inquiry to this supplier

To:

Tiger < ShenZhen YouTing technology Co., LTD >

Je veux savoir: