Description
Construction and feature
1. Protection against both overload and short circuit
2. High short-circuit capacity
3. Contact position indication
4. Applicable to terminal and pin/fork type busbar connection
5. Easy mounting onto *5mm DIN rail
Technical data
Pole No: 1,2,3,4
Rated voltage: AC **0/**0V
Rated current(A): 1,2,3,4,6,*0,*3,*6,*0,*5,*2,*0,*0,*3
Tripping curve: B,C,D
Rated short-circuit capacity(lcn): 3kA,4.5KA,6KA
Rated frequency: *0/*0Hz
Energy limiting class: 3
Rated impulse withstand voltage: 6.2kV
Electro-mechanical endurance: ? ***0
Contact position indication
Connection terminal: Screw terminal / Pillar terminal with
calmp
Connection capacity: Rigid conductor up to *5mm2
Fastening torque: 2.0Nm
Installation: On symmetrical DIN rail *5mm / Panel mounting
Note
1. MCB is for non-professional operation by those untrained, and no
maintenance is required
2. Satisfying conditions and applications as mentioned above,MCB
with "ON-OFF" indicating device is considered suitable for
isolation function.
3. Particular devices such as surge protective devices,surge
arrester etc are recommended to install at upstream line to MCB as
precaution against potential surge voltage and current occurring at
its power input side.
4. Appropriate tripping curve being chosen and properly installed,
MCB trips and switches off its protected circuit in case of fault,
and thus provides protection against electric shock.
5. B,C,D tripping curve

