FOB Price
Obtenir le dernier prix|
Minimum Order
Localité:
-
Prix de commande minimale:
-
Commande minimale:
-
Packaging Detail:
-
Delivery Time:
-
Supplying Ability:
-
Payment Type:
-
China
Personne àcontacter li
Shenzhen, Guangdong
M**0 anti bark voiceactivated stop barking collar Pet training collar dog training system pets electronics smart collar
Matching Receiver and Transmitter
1 Install the batteries and Turn on the transmitter
2.Install the batteries for the receiver.The LED inside the receiver starts to keep flashing.Press vibration or shock(PPT) button immediately.Then the LED will stop flashing and only light which indicates that mean the transmitter and the receiver have matched each other successfully.
3.If LED stops flashing on its own without press any button in the transmitter,take out the batteries.Wait for at least *0 seconds and try step 2 again.
4.Put the cover on the receiver firmly.
5.Attach the receiver to the collar.
*Bark Terminator(voiceactivated collar) DO NOT need to macth
How to Check Shock
The static impulse released but the receiver can not be seen with naked eye.you have two ways to test the shock:
•Use a test light.Put the test light on both nipples in the receiver then press shock button on the transmitter .The light will flash.Remember,the test light is designed specifically for testing only and not a normal part of collar used for the dog.Please take it off this light after the test.
•Use your finger. Select the lowest level **1.(**0=off) Put your fingers on both nipples in the receiver then press shock button on the transmitter .You will feel the shock.
*Blowing/Shouting against the receiver to turn on the Bark Terminator(voiceactivated stop barking collar)
Features
•The strong static impulse can penetrate the hair of the pet and fabric within 6mm thick.It is unnecessary to let the discharging point touch the skin of the pet.
•The static impulse can quickly and effectively curb the improper deeds of the pet.
•Both the static impulse and warning functions are set with automatic stop.This is for not reprimanding the pet continuously.
•The collar receiver,it will turn on and turn off automatically to save power.
Note for Use:
•Most pets feel uncomfortable at first wearing the collar.Dont use any of the functions before the pet has gotten used to the collar.
•The valid distance of transmission means the straightline distance between the transmitter and the receiver with out obstacles in between.If there are interference signals or signal screening around,the actual transmitter distance may vary.
•This product is for pet training .Only by training let your pet understand the intention of its owner.Good effect can only be achieved after a period of training.
•Training sessions should be kept positive and short ,about ***5 minutes long each time.
•Presently,this product is the most effective and safest tool for training pet.Following the correct operational instructions,you can effectively train the pet and bring it no harm.
•If you dont use the collar
for a long time, take the collar off your pet and take out the
batteries.
service at tendtronic dot com
VIDEO INTRODUCTION
go to VK and search Tend Tronic
