Description
The **0mA LED dimmer with LED constant current drive can drive LED
directly, has four channels, each
channel is independent and with two independent output. The output
current of each channel can be set by linked
switch current button and channel switch current button and can
output **0mA/**0mA or **0mA/1A.
The 4A LED dimmer withÂ
LED constant voltage drive canÂ
drive LED directly, has four channels,Â
each
channel is independent. The input need connect a ****4V DC
operating voltage for the device, the output voltage
depends on the input voltage.
The Dimmer is a modular installation device for fixed installation
in dry rooms. It fits on *5mm DIN rails in
power distribution boards or closed compact boxes. It can be
programmed; it can be use to customize the rooms’
environment to build the various scenes, such as WATCH MOVIE,
ENTERTAMENT, DINNER and REST and so
on; it’s brightness value can be set as any value (****0%); it is
able to set the duration time to dim up or down to
the target brightness value and the gradual change speed to extend
the luminaries life and save energy and so on. Â
It is able to use the Engineering Tool Software ETS (ETS2 version
or more) with a VD2/VD3 file to allocate
the physical address and set the parameters.
This manual describes a series of dimmers. Different dimmers apply
to connect different type of lighting, but
their functions are similar, just inÂ
use you need to note theÂ
type of connected electrical load, thusÂ
reasonable
select them and note theirÂ
technical performance. If theÂ
technical performance of theÂ
selected load is not
consistent with the technical performance of the dimmer, it is
possible to cause damage to the dimmer or
load.   Â
This manual provides the detailed technical information about
various dimmers, not only the installation and
programming details, but also the usage explanation in actual
application.
