Description

Vector Network Analyzer Measurement Instrument ZF***1

I. TEST METHOD

Can do the full-span scan, List scan and Point-frequency scan. Three channels.

II. TEST FUNCTION

Can test the Transmission parameter (the amplitude-frequency characteristic, insertion loss, phase, the gain of amplifier, the gain of antenna, group delay, option for  the antenna orientation chart measurement) and Reflection  testing， time-domain fault orientation function.

III. TEST FORMAT

Display as the logarithm amplitude and the amplitude phase at the same time. Reflection testing displays the logarithm display, standing wave ratio display, the Smith circular chart display. DISPLAY OUTPUT:5”CRT kinescope display. RECORD DEVICE: Printer or U disc

IV. Using Range And Relevant Capability

Suitable for radio, television, telecommunications, radar etc, feedback system’s testing and higher education college’s RF microwave teaching experiment. After selection can test the *0 Ω,*5Ω,**0Ω Optional time-domain fault orientation function can check the fault location of coaxial cable in the feedback system. Testing range is: *****0m, orientation true. The resolution is about  ±3mm  when the length about *0m , the resolution is ±1cm when length about *0m. Match the relevant testing accessory (impedance transformer, difference bridge erc) can test the transmission line’s characteristicim pedance,  insertion loss, time-lapse, phase shift etc. Specifications of the coaxial cable, wisted pair, coaxial connector and transmission line. It can also be used to detect the therefore cable’s leakage and shield capability.