stone fine crusher is mainly
made up of frame, impact plate and grate. The frame
consists of lower part. stone fine crusheris
welded by cut steel plates, and the others are
connected with bolts. High manganese steel liners are
embedded in the frame, which is convenient to be replaced
after wearing. Several sets of regular distributed hammers
are installed on its main shaft.The hammers, turn tableand
hammer shaft consists of the rotor. The
main unit drives the
main shaft through motor
and v-belt,which makes the
rotor turn with high speed. The centrifugal force
produced by rotors
turning makes the hammer
spread. Large rocks are fed into the crushing cavity form
feed opening and will
be crushed by high speed
turning hammer. Qualified materials are discharged
from the interval
between grates at the
bottom, while the unqualified materials are still kept and crushed
in the crushing cavity
till they are qualified.
To avoid jams, the water
content of materials to be crushed is not more than *0%generally.
