Description
Usage of cut to length line:
Cut To Length Lines can do uncoiling, leveling, measuring,
cross-cutting to length and stacking work. It mainly includes
uncoiler, leveler, measuring encoder, shearer, conveyor, stacker,
hydraulic system, pneumatic system and electrical system, etc., the
line can make sure of accurate feeding and shearing. It can be
widely used in cold or hot rolling carbon steel, tinplate,
stainless steel and all the other kinds of metal materials with
surface coating.Cut to length line is controlled by NC servo
system. It has PLC controlled the length measurement. The
information of length, shearing numbers and speed can be input to
the PLC systems. When the need shearing number is reached the line
can stop automatically. The line speed can be adjusted, It has a
encoder with high precision, and whole line can work automatically
and operate easily, smooth sheet can be made.
Composition of cut to length line:
1. Entry coil car ***- To
carry the coils on the decoielr
2. Hydraulic decoiler ***- To make
the material from the coil-shaped into the plate-shaped
3. Fourfold straightening units ***- To do the
pre-leveling for the plates
4. Looper ***- create a buffer zone to increase
the straightening and cutting precision also to increase the line
speed;
5. Servo device controls the cutting length ***-
To make sure the fixed length cutting as per your specifice
requirements on the length
6. Hydraulic cutting machine ***-To do the cutting
action
7. Feeding table ***-To transportation the
plates and ensure the stack quality
8. Hydraulic lifting table ***-To control
the height of the plates on the stacker
9. Pnuematic stacker ***- To make sure the plates
in queue one by one
*0.Exit coil car ****- To carry out the finished plates
.
*1.Electrical system
*2.Hydraulic system
Working flow of cut to length line:
Feeding car→decoiler→elementary level→rolling way
worktable→leading guide→main leveling unit→length measure
device→clamp conveyor→cut→convey and throw out device→whole
pneumtic system→Hydraulic and pneumtic→electric
We offer various standard models of cut-to-length lines.
These lines can be cut from ranges of 0.5mm up to 3mm in length
with different coil widths weights. Each of these lines can be
custom tailored to meet specific production needs.For further
detail specification or further requirement, warmly welcome you
contact with us any time.
