Description
DSIC series DIP Switch
STANDARD SPECIFICATION
1.Ratings
1.1 Mechanical Life：***0cycles minimum
1.2 Comtact Rating ：**0mA at *0Vdc Non-switching,*5mA at
*4Vdc，*0mA
at *0Vdc Switching
1.3 Contact Resistance ：
*0mohms maximum（initia）
**0mohms maximum（after life）
1.4 Insuiation Resistance：
***0MΩ Minimum at **0vdc between adjacent closed contacts and
also
across open switch contacts.
1.5 Dielectric Strength:**0vac,RMS,minimum voltage measured
between
between adjacent closed contacts and also across open switch
contacts
1.6 Switch Capacitance：5pf at 1 mhz.
1.7 Operating Temperature：**0℃ to+ *5℃
1.8 Storage Temperature：**0℃ to **5℃
1.9 Test Condition：The standard test shall be 5～*5℃
temperature and
*5～*5％ relative humidity **0～***0Hpa atmospheric pressure
unless otherwise
specified ln case of any question happen retest condition shall
specify by
temperature *0±2℃,*5±5％RH and **0～***0Hpa
2.Materials and Finishes ：
2.1 Finished code：
G:Full Gold Plated(Contact area & terminal with
gold-plated)
S:Contact-Gold plated with Terminal Tin-plated
2.2 Plated code
E:3u"Gold-Plated
F:*0u"Gold-Plated
A:*2u"Gold-Plated
B:*0u"Gold-Plated
G:*0u"Gold-Plated
2.3 Base：UL *4 VO grade Thermoplastic/black color
2.4 Cover：UL *4 VO grade Thermoplastic/black color
2.5 Actuator：UL *4 VO grade Thermoplastic/Whit color
3.Processing：
3.1：switch operation and taping
3.**1 Use tweezers or ball point pen for operation
3.**2 flux cleaning should be done without removing the tape
3.**3 if the tape is removed，it adhered less than before when it
is
placed back on，possibly causing flux inflow.
3.**4 Sealed switches withstand aqueous，detergent and
isopropyl
alcohol washing
