FOB Price
Obtenir le dernier prix( Negotiable )
|Minimum Order
Localité:
-
Prix de commande minimale:
-
Commande minimale:
1 Set
Packaging Detail:
Seaworthy Package
Delivery Time:
By Sea
Supplying Ability:
1 Set per Month
Payment Type:
T/T, L/C, D/A, D/P
Personne àcontacter Ms. Trista
8 Hongye Road,Yuhong,Qingbaijiang, Chengdu, Sichuan
1. Brief introduction
Aluminum rod continuous casting and rolling line can produce three
kinds of conductive aluminum rods of *5mm, *2mm, 9.5mm.
*5mm aluminum rod is produced by *0 rolling stands;
*2mm aluminum rod is produced by *2 rolling stands;
9.5mm aluminum rod is produced by *4 rolling stands.
2. Process Flow
2.1 Aluminum ingot and scrap aluminum wire-alumInum melting furnace
*-four-wheel horizontal continuous casting machine- oil-pressure
shearer -continuous rolling mill - coiler with dual basket -
aluminum rod
2.2. Melt aluminum or melt aluminum molten which is stored in the
holding furnace will be injected to four-wheel continuous casting
machine through launders. The sectional area of trapezoidal casting
ingot is2, **0mm² , Scrap aluminum bar is cut by oil-pressure
shearer and then acceptable aluminum bars are sent to continuous
rolling mill, after emulsion bag, guiding wheel, leading pipe and
take-up coiler, the rod will become looping.
3. Main Technical Parameters
3.1. Diameter (finished EC-aluminum): 9.5, *2, *5mm
3.2. Max. Capacity: 6t/h
3.3. Coil's weight: ~2t
3.4. Overall weight of main equipment: ~ *5t
3.5. Overall power of main equipment: ~**0kW (excluding
furnace)
3.6. Finished rolling speed: ≤ 8.*7m/s
3.7. Overall dimension: Approx. *2.1× 7.2× 4.2m (L × W ×
H)
4. Supply of scope
4.1. Four-wheel Continuous Casting Machine (with 2PCS of casting
ladles)
4.2. Single-Track Oil Hydraulic Shearer
4.3. Continuous Rolling Mill
4.4. Emulsion Lubrication System for Rolling Mill
4.5. Lubrication System for Gearbox
4.6. Emulsion bag, Guiding wheel and Leading Pipe
4.7. Coiler and Coiler with Dual Basket Trolley
4.8. Electrical Control Device
