Description
Product features
1. Used for angle cutting and holes, grooves and water-slots
milling processing on the aluminum profiles.
2. All actions of equipment are controlled by computer. It will be
completed operation procedure automatically after feeding profiles.
Moreover does not need the manual intervention.
3. Feeding manipulator adopts ATLANTA gear and rack transmission,
accurate positioning.
4. Milling unit can be installed *2 electric spindles. It can mill
four surface of profile, even does not need change tools.
5. Milling motor adopts imported HSD spindle motor with
stable rotation, low noise, and strong milling ability.
6. The servomotor drives the speed reducer to adjust the cutting
angle in *5°~**5°.
7. Cutting motor is imported from Italy SEIMEC with blades direct
connection to makes the cutting surface smooth.
8. Feeding device can feed profile automatic continuous, safe and
reliable.
9. Equipped with bar code print, can supply unique sign for
profiles.
*0. Intelligent CNC system and concise Human-Conputer Interface
makes operation easier and more convenient.
*1. Cutting and milling unit adopts completely closed design to
ensure operator safe.
*2. Optional: E-works digital factory system to makes line
production.
Technical parameters
Voltage: **0V *0Hz
Air pressure: 0.**0.8MPa
Cutting motor power: 2.2kw
Milling motor power: 3kw
Blades spec: **0×*0×4.4×**0T
Cutting height: *0~**0mm
Cutting width: *0~**0mm
Length of profile: **0~***0mm
Min remainder material: **0mm
Angle tolerance: ±5'
Cutting length tolerance: ±0.2mm
Repeat locating tolerance: ±0.1mm
Contour dimension: ****0×***0×***0
Weight:***0kg