Description
Model:CBI***0A
Input
current(max):2.5A
Input
voltage(max):5.6v
Length:**0cm
Material:Pure
copper wire and heat-resistant
polyethylene
MICRO/5PIN:Glod-plated
contacts
Package:Polythene
wrapperÂ
CBI***0A Smart
Data Cable
Product Specifications /Features 1. Fit for iPod/iPhone
(Apple), Nokia, MOTOROLA, Samsung, etc.
2. Smart electronic display screen can monitor the completion
status of each item.
3. The protection functions of voltage and current value is
provided with high safety and stability.
4. Small volume, simple installation, powerful function and more
secure than the average charging cable.
CBI***0A Smart Data Cable Instructions
1 Electronic display screen direction status:
(1), While it is charging, LED keeps shining, the display shows
number"0", it is put on standby for charging.
(2), After connect the mobile phone, the monitor begin to detect
current, LED shining slowly, the display number showing means the
electrical current flow.
(3), If the monitor detect extra-high voltage, LED shining fast and
the display shows"HI"(high voltage).
2 The protection functions of voltage
(1), When the input voltage of data data is higher than 5.6~*0v,
the electronic switches in the monitor will be closed, the display
shows"HI"(high voltage). Now it can prevent your mobile phone
burned out by the voltage since the output voltage being
0v.
(2), When the voltage DC ripple of your charger is high for a long
time, the charge circuit of your mobile phone will be burned out.
The electronic filters can reduce ripple voltages and improve
efficiency. It can offer more security protection for your mobile
phone by shorter recharge time.
3 The protection functions of current value
(1), When your mobile phone is charging by the data line, the
monitor can detect adaptable current automatically. You can observe
current values through the monitor or test whether the power output
is untrue by the load instrument. It is good for consumers to
protect the legal rights by use our production.
(2) When the current value of data cable is higher than 2.5A(max
2.5A), the output switches in the monitor will be closed, the
output current is 0. When the display shows "HI"(high current
value) means your mobile phone is being protected and the LED keeps
shining. You need to turn off electricity and wait for automatic
reset when recharging.
