FOB Price
Obtenir le dernier prix|
Minimum Order
Localité:
-
Prix de commande minimale:
-
Commande minimale:
-
Packaging Detail:
-
Delivery Time:
-
Supplying Ability:
-
Payment Type:
-
Personne àcontacter Rebekah
Dalang street, Shenzhen, Guangdong
| Silicone Conductive coating | |||||
| Model No.: PD******4AB |Â PD****3AB | PD*****-AB | PD******6HD-AB | PD******6AB... | |||||
| Â | |||||
| Method of application: | |||||
|
•   Mix AB agent
thoroughly until completely combined. •   Using the mixer fully stirring for 5 to *0 minutes. •   Before coating, it will be filtered once through a ******0 holes filter screen. •   The mixing ink of effective operating time is 6 hours. •   When the ink is used, room temperature should be controlled at *2C approximately, and ensure constant temperature and humidity. |
|||||
| Â | |||||
| Vulcanization conditions: | |||||
|
•   Vertical oven:
**0C, *0 minutes •  LR conveyer belt: **0C, 7 minutes |
|||||
| Â | |||||
| Tips:Â Â Â | |||||
|
•   Because of the
character of volatile solvent, when using the coating ink, please
pay attention to ventilation, and keep away from flame and
heat. •   Avoid long time contacting with skin. After the vapor is inhaled or contact with the skin, wash immediately with plenty of soap-suds. •   Storage period: 6 moths at normal temperature without any catalysts being added. |
|||||
| Â | |||||
| Application: | |||||
| It is a kind of double fluid heating curing coating conductive inks, with stable resistance value, excellent adhesion, good abrasion resistance, bright appearance, high tearing strength, etc, especially used in silicone rubber cable accessories, such as composite insulator, lightning arrester, and so on. | |||||
| Â | |||||
| >>> Typical Properties Data | |||||
| Â | Â | Â | Â | Â | Â |
| Model No. |
Resistance value KΩ |
Ratio A:B |
Specific Gravity *5°C |
 Punctur  voltage |
Application   |
| PD******4AB | 1~3 | **0:1 | 1.*1 | *6 | Small value resistance, moderate black |
| PD****3AB | 5±1 | 1:1 | 1.*3 | *0 | Double components coating |
| PD******5AB | 4±1 | 1:1 | **3 | *0 | High temperature and double components coating |
| PD******6HD-AB | 4±1 | **0:1 | 1.*5 | *6 | Low temperature coating |
| PD******6AB | 4±1 | 1:1 | 1.*3 | *0 | High temperature and double components coating |
| PD********1AB | 4±1 | 1:1 | 1.*3 | *0 | High temperature and double components coating |
| PD****3D-AB | |||||
