FOB Price
Obtenir le dernier prix( Negotiable )
|Minimum Order
Localité:
CN
Prix de commande minimale:
-
Commande minimale:
1 Piece
Packaging Detail:
1pc/plastic bag
Delivery Time:
2 days
Supplying Ability:
10000 Piece per Month
Payment Type:
T/T, Western Union, PayPal
Personne àcontacter kelly
Shenzhen, Guangdong
Â
Â
Features:
*Frequency Range: **3/**8(Customizable ******0 MHZ)
*Sensitivity up to ***1 dBm
*Data transfer rate:0.******6 kbps
*FSK,GFSK and OOKModulation mode
*1.**3.6 V Power supply
*Ultra-low consumption shutdown mode
*Digital received signal strength indicator (RSSI)
*Timed wake-up function
*The antenna automatically match and two-way switch control
*Configurable packet structure
*Preamble detection
***-byte transmit and receive data register(FIFO)
*Low-power detection
*Temperature sensor and *-bit
analog-to-digital     converters
*Operating Temperature Range:**0 ~ + *5 °C
*Integrated voltage regulator
*Frequency hopping
*Power-on reset function
*Built-in crystal adjustment function
Â
Application:
*Remote
control                           Â
*Remote meter reading
*Home security alarm and remote keyless
entry        Â
*Sensor networks
*Industrial control
*Tire Pressure
Monitoring                         Â
*Home automation telemetry
*Health Monitoring
*Personal data records
*Wireless PC peripherals
*Toy control
*Tag reader
Â
Â
Â
Â
Â
Pin Number |
Pin Definitions |
Description |
1 |
GND |
Connected to power ground |
2 |
GPIO0 |
Internally by module transmitter control foot |
3 |
GPIO1 |
Internally by module receives control foot |
4 |
GPIO2 |
GPIO2 pin chip directly connected |
5 |
VCC |
Positive supply 1.***3.6V |
6 |
SDO |
0 ~ VDD V digital output provides a serial readback function of the internal control register |
7 |
SDI |
Serial data input. 0 ~ VDD V digital input.The pin is a *-wire serial data stream of serial data bus. |
8 |
SCLK |
Serial clock input. 0 ~ VDD V digital input.This pin provides a *-wire serial data clock function. |
9 |
nSEL |
The serial interface input pin. 0 ~ VDD V digital input. This pin to *-wire serial data bus select / enable function, this signal is also used, said the burst read / write mode. |
*0 |
nIRQ |
Interrupt output pin |
*1 |
SDN |
Digital input. When SDN = 0, module not in shut down mode, When SDN = 1 module will be completely closed and the register values will be lost.. |
*2 |
GND |
Connected to power ground |
*3 |
ANT |
From *0 ohm coaxial antenna |
*4 |
GND |
Connected to power ground |
Â
Â
Â