Description
Products:
Â
Overview
Â
SINOV-TDM**0E is a new generation analog card with interchangeable
FXS_**0 Â and FXO_**0 modules. It can eliminate the
requirement for separate channel banks or access gateways.
The SINOV***0E contains 8 module banks. Each bank supports
one analog interface. The module banks may be filled with up to
FXO_**0 or FXS_**0 modules enabling the creation of any combination
of ports. Scaling of an analog card solution is accomplished by
simply adding additional cards.
SINOV-TDM**0E works with Asterisk®, Elastix®, FreeSWITCH™, PBX
in a Flash, trixbox®, Yate™ and IPPBX/IVR projects as well as
other Open Source and proprietary PBX, Switch, IVR, and VoIP
gateway applications.
Main
Features:
1Â High
security: It adopts tertiary thunder preventing technology, can
prevent the thunder and lightning from striking
effectively.
2Â No
additional power connector or supplier is required for the
operation of FXS modules, reduced the line wave of the power, has
improved the voice quality.
3 Â World
Wide Usable: Configurable line interface meet global telephone line
interface requirements.
4Â User
could choose any of combinations of FXO_**0 or FXS_**0 modules
according to customer’s requirements.
5 *2 bit bus
master DMA data exchanges across PCI Express interface at
**0Mbytes/sec for minimum host processor intervention.
6Â The
high stability firmware is exported / imported with DMA data
exchange, so it accelerated and reduced CPU load
greatly.  Under the environment of the same hardware,
CPU rate of utilization is equal to CPU rate of utilization of
using *2 port analog card.
7Â It
supports all the functions of Asterisk PBX systems
needed.
8Â
Humanization is designed: The module socket that should be nipped
is all adopted and stuck to one slice of sockets, can prevent
stabing users finger effectively.
Â
New
function:
1Â Â Easy
to install , using way is same as DIGIUM Asterisk card
2Â If
use Trixbox/Elastix/Freeiris2 IPPBX software, it can automatic
recognition our cards, don’t need to install any
drivers.
3Â
For 2U classis high
Â
Product
Spotlight
Â
SinoV-TDM**0E is a new analog card.
It can be used for connecting analog telephones and analog POTS
lines through a PC. It delivers the superior voice quality on both
FXO and FXS interfaces in all 8 ports.
· Adjustable Interrupt
Routing Design
· Interrupts Frequency
Adjustment
· Up to 8 Simultaneous
PSTN Calls (Per PCI Slot)
· Compatible with All
Commercially Available Motherboards
· *-Month “No Question
Asked†Return Policy
· Lifetime Warranty
Â
Target
Applications
Â
· Channel Bank Replacement / Alternative
· Small Office Home Office
(SOHO) applications
· Small and Medium Business
(SMB) applications
· Gateway Termination to
analog telephones/lines
Â
Services and
Features
Â
· Caller ID and Call Waiting
Caller ID
· ADSI Telephones
· Loopstart Signaling
Support
Â
Technical
Specifications
Â
· Up to 8 ports
through a combination of FXS_**0 and FXO_**0 modules
· Full-length analog
card
· Up to 2 quad FXS or FXO
modules
· RJ*5 connector
· **-bit *3MHz PCI-E and
fully PCI-E compliant, compatible with all commercially available
motherboards, and proper sharing of PCI interrupts
· *2 bit bus master DMA data
exchanges across PCI interface at **2 Mbytes/sec
· Autosense compatibility
with 5 V and 3.3 V PCI busses compatible
· Power: 8.*1W Minimum,
*8.*4W Maximum at 3.3 V or 5 V.
· Operation temperature:
0°C to *0 °C
· Storage temperature:
**0°C to **5°C
Â
Operating
Systems
Â
· Linux (all versions,
releases and distributions from 1.0 up)
Â
Minimum Hardware
Requirement
Â
· ***-Mhz Pentium III
· **8MB RAM
· Available PCI-E Slot
