Description
Areas of application:Â
Quarries, sandpits
Cement works, lime works
Farming: Conveying of beets, grains, potatoes, fertilizers,
wooden chips
Coal and coke transport
Sugar refineries
Salt mines
Mobile crushers and screens
Technical Data of Rubber Cover:
Tensile Strength: *0Mpa**5Mpa
Elongation at Break: Not less than **0%
Adhesive strength between carcass: Not less than 6.0N/mm
Adhesive strength between cover and carcass: Not less than
3.0N/mm
Elasticity: Not less than *2%
Abrasion: No more than **0mm3
Divided by the chevron vulcanization technology
1.The first vulcanization molding: The base belt and chevron
vulcanize into a unity. This strengthens the adhesion between the
Core and the rubber cover. The chevron will not fall off. Life time
is longer.Â
2.The second vulcanization molding: The base belt and chevron
vulcanize into a unity by low temperature. It avoid the aging of
The base belt. At the same time, it can make sure the adhesion
between the base belt and the chevron.
Specification
1.Chevron shape, V shape, cleat shape, herringbone shape,
cylinder shape.Â
2.The shape, height and pattern pitch can be designed
according to the user's requirements.
Packaging
For container shipments, belts are wound on steel cores. Outer
surface of belt roll is covered with rubberized fabric and sides
are covered with plastic corrugated flanges. For break bulk
shipments, belts are packed in wooden drums with MS flanges and tie
rods on sides.
