Description

Hydraulic pressure reset machine Hydraulic pressure reset machine Brief Introduction Hydraulic pressure reset machine is suitable for mine mining operation, used for resteting ofbelow *5 tons motor vehicle and mine car.
Hydraulic pressure reset machine Component & Structure Features.
1、The whole machine components: the whole machine mainly consists of hydraulic conveyance portion and lateral portion of the lever mechanism pulley frame parts.
2、Main body features: The machine uses two coordinate moves hydraulic components. Its compact, high work efficiency, stable and reliable, low labor intensity. Especially since no power consumption, so safety. It applies to *5 tons of these locomotives or carts on the road (reset) operation.
3、Lifting system (including a lever mechanism part parts and hydraulic conveyance).
a、Leveraged institutions: the main lever, auxiliary lever, rod, roller, side hooks and other parts. Simple structure, easy maintenance and operation.
b、Hydraulic lift parts: the part of the main hydraulic piston pump manually or by the lever, fuel tanks, fuel tank and other components.
Advantages: high oil pressure, leakage, no noise, long life, adjustable height range high degree of freedom.
c、Set on the side of the lifting hook, both to ensure the reset focus and stability, but also convenient and reliable.
d、Horizontal roller frame parts: horizontal roller stand apart from the lateral portion of the lever mechanism and lateral hydraulic parts, the main set of horizontal pulleys. Make or have been out of the tub locomotive wheels, through the rotation of the wheel, slider mobile correct orbit. Quick and easy. It mainly consists of the base rail and carriage and other components. Hydraulic pressure reset machine Parameters 1、the maximum load: top column load****0kg   side hook (or in conjunction Interface) Load****0kg
2、the maximum stroke (actual use do not exceed the marked line): top column stroke **0mm
Side of the hook (or in conjunction Interface) Stroke**0mm  cross travel **0mm
3、Weight:*0kg Hydraulic pressure reset machine Instruction 1、Unpacking Precautions: Do not before unpacking boxes upside down. Do not use when unpacking packing wooden ornament punch head to prevent damage inside parts. Should be used carefully pry bar pry sealing strip, and then pry the lid. After the press machine packing slip out one by one after verification, the machine cleaned rust oil and dirt, and Shang Hao oil use.
2、Preparing for use: Relax hydraulic lift parts pass valve, open the oil valve on the top or side of the hook at the appropriate column pressure to reduce to the lowest position, the machine\'s lifting system combined with the lateral movement of the sleeve portion (below the seat of the lifting column sub-horizontal slide inserted into a roller rack side tank); would slide horizontally on a flat solid pedestal level ground (reset job implementing the appropriate position); will reset the machine side of the hook into the implementation of appropriate reset locomotive or tub the lower position.
3、Action: Close down the oil return valve, push the lever into the hand of the hole, slowly pushed the lever, so that the core reciprocating piston pump, until the wheel up to the desired height, the lateral movement of the baffle appropriated by the commutation need to stall and put the lever into the crank hole, hand pushed the lever, slide laterally with lifting system will move laterally until the desired position to move locomotives or tub, slowly open the oil return valve, so that locomotives or tub slow decline until the wheel is reset (orbit) operations.
4、Unloading machine: fully open movement responsible for lifting the oil return valve on the top or side of the column hook downward pressure until reduced to the lowest position. Close the oil return valve, tighten the vent, reset the machine shed.
5、Machine maintenance and periodic inspection: In order to ensure that the machine each time you use flexible and reliable, it must perform effective maintenance, and conduct periodic checks.
a、To ensure that the sliding part and bare activities not rust, after use must be on the oil. Such as using the interval is longer than the anti-rust oil must be. Do not use machine falls, bumps and bruised, to ensure accuracy of activity.
b、demanding a quarterly cycle check of the moving parts and oil.
c、when replace or supplement the hydraulic oil viscosity should be chosen for ****8 - CST (oil temperature *0 ℃) specification, the oil filter accuracy is not more than *0 microns of hydraulic oil. When filling the hydraulic oil shall not be mixed with sand and other impurities, and note when filling every time must be to exhaust the pump body and cylinder.
d、When need to repair, application of gasoline or diesel (safe) clean oil and main components of working face and note shall not part cause scratch, knock against, deformation and other damage can affect the normal operation of the machine.