FOB Price
Obtenir le dernier prix200 ~ 450 / Piece ( Negotiable )
|Minimum Order
Localité:
China
Prix de commande minimale:
Commande minimale:
10 Piece
Packaging Detail:
Boxes
Delivery Time:
15-20 dats
Supplying Ability:
200000 Piece per Month
Payment Type:
T/T
Poland
Personne àcontacter Mr. Pawel
Makuszynskiego 4, Krakow, malopolskie
Induction lighting features
1. Energy efficiency - lighting in the inductive technology is an
energy-saving solution in comparison with the traditional lighting.
The value of the reduction in the electric energy expenses amounts
to ****0% of the active power depending on the type of the
traditional lighting and the application. With regard to the
passive power compensation in the ignition system of the inductive
lamp, about *0% of passive power of the traditional lamp can be
saved additionally.
2. Purchase costs of inductive lamps are insignificantly higher in
comparison with the traditional lighting: sodium, metal-halide
lighting, etc. In this case savings are noticed immediately after
the exchange of the traditional lighting into the inductive one.
Additionally, the lifetime of the induction light sources is much
higher, which directly influences the expenditure connected with
the exploitation of the traditional light sources - the lack of
frequent exchange of light sources.
3. Lifetime of a light source - a lifetime of the induction light
source is *0,**0 - **0,**0 hours of lighting. Due to this fact
the lamps equipped with the induction light bulbs can light for *0
years without the significant decrease in the light stream. At the
same time they are by about *0 times more effective in comparison
with the incandescent and fluorescent lighting, *0 times more
efficient than the halogen lighting, *5 times more effective than
the sodium lighting and *0 times more efficient than the
metal-halide lighting. The longer lifetime also means fewer
exchanges of light sources and costs connected with that.
4. Technology of the light sources exchange - the exchange of the
traditional lighting into the inductive one does not require the
exchange of the entire holders as it is necessary, for instance,
while exchanging lighting into the LED technology. In this case it
is enough to exchange only the source of light together with the
power supply system assuming that the old holder does not require
renovation resulting from the wear.
5. Light stream - the inductive technology is so much effective
that the decrease in the stream amount to *0 ? *0 % during *0,**0
hours.
6. Colour rendering index amounts to Ra - ****2 for the induction
lighting.
7. Colour temperature of light sources - the induction lighting has
a full range of colour temperatures: 2,**0 K, 3,**0 K, 4,**0 K,
5,**0 K and 6,**0 K.
8. No stroboscopic effect - the stroboscopic effect does not occur
due to the used lighting technology.
9. Resistance - the induction lighting is very resistant to the
outer temperature and shocks. The inductive lamps can work at the
temperatures from **0°C to **0°C. Moreover, they are resistant to
shocks, thus their use, among others, in tunnels, on bridges,
freeways, cranes, railway industry, etc.
*0. Turn-on time - the induction lighting turns on within about 0.5
sec and reaches its full properties after about **3 minutes. The
induction lighting can work together with the motion
sensors.
*1. Ease of control and service - the lamps made in the inductive
technology can be controlled in every way even with the possibility
to dim and to cooperate with other solar systems owing to the
application of advanced solutions by the Asia Pacific Energy
Solution company.
