Sell Platinum rtv liquid silicone rubber for tire molds By SHENZHEN HONGYE JIE TECHONOLOGY CO., LTD., China
Pas encore membre de TradeKey.com? Inscrivez-vous pour vous connecter avec 9 millions d'importateurs et exportateurs. Rejoignez-le maintenant c'est gratuit |
User Identifiez-vous Devenir membre GRATUITEMENT !
Live Chat Live Chat
❯
BOOK A CALL
Book Call On Your Favorite Time
Code
🗘

By Signing Up. I agree to TradeKey.com Terms of Use, Privacy Policy, IPR and receive emails related to our services

❯
Contact Us
Sell Platinum rtv liquid silicone rubber for tire molds

Sell Platinum rtv liquid silicone rubber for tire molds

FOB Price

Obtenir le dernier prix

9.98 ~ 12.88 / Kilogram

|

Minimum Order

Localité:

Guangdong, China

Prix de commande minimale:

Commande minimale:

200 Kilogram

Packaging Detail:

20kgs per drum or 200kgs per drum

Delivery Time:

within 3 days after payment confirmed in our bank

Supplying Ability:

8000 Kilogram per Day

Payment Type:

Western Union, L/C, T/T

Contacter maintenant
SHENZHEN HONGYE JIE TECHONOLOGY CO., LTD.

SHENZHEN HONGYE JIE TECHONOLOGY CO., LTD.

China

Membre gratuit

Personne à contacter Ms. Bella

Building 7, No.1805, Oriental pearl city, Longgang District, Shenzhen, Guangdong, china, Shenzhen, Guangdong

Contacter maintenant

Description

Platinum rtv liquid silicone rubber for tire molds�

Platinum rtv liquid silicone rubber for tire molds Typical Applications
HY- E series addition molding silicone could be mainly used for making concrete�stones, wax molds, PU molds, resin molds, gypsum casting, candle molding and�chocolate, candy and any other FDA food product mold making, prototyping etc.�HY-E**0 Silicone Rubber�has been used for years to�make tire pattern molds.

Platinum rtv liquid silicone rubber for tire molds Description
HY- E series addition molding silicone is generally named two-components silicone�rubber, Part A and part B. It features an exceptional fluidity and good operability. The mixing ratio is 1:1 (*0:1), mainly be suitable for making molds application.
Platinum rtv liquid silicone rubber for tire molds Characteristics
*low shrinkage (less than 0.1%)
*high tensile and tear strength with high copy times
*easy for operation (mixing ratio at 1:1 /*0:1)
*very good flow and easy for pouring operation
*Fast and non-shrink cure at room temperature which can be accelerated considerably by the application of heat
�
Platinum rtv liquid silicone rubber for tire molds Technical Parameters
Product E***0
Appearance �Translucent
Hardness(shore A) *0�2
Mix ratio(A:B) 1:1/*0:1
Viscosity Part A(mPa.s) ****0�***0
Viscosity Part B(mPa.s) ***0�**0
Tensile strength (kgf/cm2) *5�5
Tear-strength� (kN/m) *0�2
Elongation(%) **0�*0
Pot life/working time (mins) ****0
Curing time/setting time (hrs) **4hrs(*5�C)
*****0mins(*0�C)
Shrinkage rate (%) 0.1
(Please note: the above data for this product in *5�C�temperature, *5percent humidity conditions, for reference. The accurate data is measured by customers when using.)
�
Operation instruction of Platinum rtv liquid silicone rubber for tire molds:
1. Pls clear the model and tool totally before operation to prevent cure inhibition.
2. Weigh the two part correctly by electronic weight in two separate container.
3. Mixing the two parts in 1:1/*0:1 and stir part A and part B evenly in **3 minutes.
4. And get the mixture for vacuum-pumping for de-air the bubble in around **3�minutes. (If there is no vacuum machine, pls pour the mixture carefully and slowly�down the side of the mold frame so that less bubbles caused)
5. Enclose the product (the original model) with four plastic plates or wooden plates.
6. Clean your products and brush a layer of release agent(detergent or soap water) on�your product.
7. Pour the vacuumed mixture into the model frame from the side of the mold frame.

�Platinum rtv liquid silicone rubber for tire molds�Notice:
As our E-series silicone is platinum cure silicone, which is very easy to cause
cure inhibition , so pls do remember thoroughly clean the model and tool before�operation . Besides , pls avoid the liquid E-series silicone contact or mix with the�following material , otherwise the silicone won�t be cured :
1. Liquid condensation silicone ( condensation silicone not completely cured or organic�tin compounds )
2. Sculpture, sulfide and sulfur rubber materials.
3. Amine compounds as well as contains the amine materials.
4. Pewter solder flux.

Platinum rtv liquid silicone rubber for tire moldsPACKAGE:
If ratio is 1:1 :Packed in *0kg/pail + *0kg/pail and **0kg/pail + **0kg/pail.
If ratio is *0:1 :Packed in *0kg/pail + 2kg/pail and **0kg/pail + *0kg/pail.

Any more information, pls feel free to contact Bella at any time.
MOB:***************2
Skype:bellajiaqi

Send a direct inquiry to this supplier

To:

Ms. Bella < SHENZHEN HONGYE JIE TECHONOLOGY CO., LTD. >

Je veux savoir:

Get Verified Buyers & Suppliers

Avail Free Consultation

Code
       


By Signing up. I agree to TradeKey.com Terms of Use, Privacy Policy, IPR and receive emails related to our services

no thanks