Â
Platinum cured
silicone rubber for tire
mold
 Description of platinum cured
silicone rubber
 Advantage of platinum cure
silicone rubber for tire
mold 1)Non-
shrinkage 2)high
tensile and tear strength with high copy
times 3)
exceptional fluidity and good operability (mixing ratio at 1:1
) 4)high
temperature resistant in **0 Centigrade
 Operation instruction
ofplatinum cure silicone
rubber for tire mold Step One:Take **0g of part A and **0g of
part B and mix in 1:1 and mix the two part
evenly.
 Step Two:vacuum pumping Without exception, this step takes
less than *0 minutes. Note: The time for vacuum-pumping
should be less than 3 to5 minutes ,otherwise, once the silicone
rubber has cross-link reaction during vacuum pumping process, it
will not be operated.
 Step
Three:Pouring the mixture into the frame
with original mold slowly .
 Shelf life for silicon rubber for
mold making 8~*0months, when stored in a dry
& cool place under the room temperature
*5.
 Packing for silicon rubber for
mold making *0kg/drum for part A+ *0kg/drum
for part B in one set ,**0
kg/drum for part A+ **0kg/drum for part B in one
set
Â
