Description
Technical Specification
MPO/MTP Connector Standard SM MT Ferrule Low Loss(Elite) Ferrule
Standard MM MT Ferrule Low Loss MM MT Ferrule
Insertion Loss Typical (dB) 0.*5 0.*0 0.*5 0.*0
Maximun (dB) 0.*5 0.*5 0.*5 0.*5
Return Loss (dB) large or *0 for APC (8 Angle Polish) no less than
*0 for PC
no less than *0 for PC **-
Male/Female (dB) Male: With Pins, Female: Without Pins
Exchangeability (dB) less than or equal to 0.3 (Connector
Randomly)
Tensile Strength (dB) less than or equal to 0.3 (Max *6N)
Vibration (dB) less than or equal to 0.3 (*0 ~ *5Hz)
Temp.Range (dB) less than or equal to 0.3 (**0 ~ *5, *2Cycles)
Ordering Information
MPO-male / APC /*2F - FC /UPC / SM / 2.0/ L1 / LM / RC
Connector Type MPO-female , MPO-male
Endface APC , PC
Fiber Count 4,8,*2,*4 MT Fiber
Connector Type MPO-female , MPO-male , FC, SC, ST, MU, LC
Endface PC,UPC,APC
Fiber Mode SM=Single mode , MM=Multimode (*0, *2.5, OM2, OM3,
OM4)
Cable Diameter 0.9,2.0
Branch Length L1=0.5,0.6,0.7......1.0meter,or as required
Cable Length L=1,2,3,4......meter,or as required
Cable Type RJ:Jacket Ribbon Cable , RB:Bare Ribbon Cable , RC:**0um
round cable