Sell Continuous Emission Monitoring System By China Sciences Mapuniverse Technology Co., Ltd., China

Description

Monitoring the waste gas emission from Power Generation, Thermal Power, Iron and Steel, Petrochemical, Cement, Waste Power etc.
Â

OVERVIEW:

AS****0 comprises sampling subsystem, gas measuring subsystem, smoke measuring subsystem, auxiliary parameter measuring subsystem, data collecting and handling subsystem, blowback subsystem and other monitoring subsystem, which can continuous monitoring SO2, NOX, *2,SO2,NOX,O2,CO,CO2,NH3,HF, HCL,PM*0, flow rate of exhaust gas, temperature, pressure, humidity and other gas parameters, the ratio and volume doses of emission will be calculated, printed, displayed, managed, and transferred to relevant department by data and textual pattern transmission system.

AS****0Continuous Emission Monitoring System is mainly used stack gas monitoring of boiler, kiln, refuse burning and etc. Crucial parts of this system are the advanced diode array fiber-optics spectrophotometers and laser dust density monitor, processing all intellectual property rights of the core instrumentation.

FEATURES:

Automatic analyzing the concentration of one or more components of the concentration of SO2,NO,CO,CO2,O2,C2H4 and gaseous pollutant in the mix gas, but also detecting the discharge flue dust in the fume and the monitoring of process parameters;

Measuring results will be stored in the data sampling control system automatically;

All kinds of ways of transmission can be compatible, multi-levels networking;

Standard modular design, easy to maintain, upgrade and expand;

CEMS system can be self-diagnosed, including invalid probe and detecting source, range exceed alarm, breakdown of main units alarm, timely fault notice during the operation;

Site data timely transferred, fault remote diagnosis;

Auto-calibration zero by air(

Data can be collected, stored, handled and distinguished by data system, which can control the daily construction of CEMS, including cycling auto-correction, auto-reverse blowing probe and filter of sampling system, providing the information what approved test and monitoring needed;

Multichannel 4~*0MA analog output and relay contact output;

high-accuracy, stable

short preheating time*5mins

bilingual menu operation

User can do the man-machine interaction through keyboard and LCD in the front

system can non-stop operate at least *0 days with no need for daily maintenance

Interval time: one adjusting every **6 months according to environmental condition

easy to use, operate and set, low-cost, low work load for maintain

SPECIFICATION:

ITEM	SPECIFICATION
Measuring elements	SO2,NOx or O2 (according to userâ€™s requirements, no O2 sometimes)
Measuring range	SO2 0 ~ *0mg/m3 NOx 0 ~ 0 mg/m3 O2 0 ~ 5vol%
Repeatability	Each gas component, respective rangeÂ±0.5%(FS)
Digital display drift	Each gas component, respective range within Â±1%
Zero drift	Each gas component, respective range within Â±2%/weeks
Drift	Each gas component, respective range within Â±2%/weeks
Linearity	Each gas component, respective range within Â±2%/
Response time	Each gas component, its respective measuring range within 0 seconds, but SO2 within 0 seconds
Stability relative to ambient temperature	The temps changes within Â±5Â°C, satisfied the specified value of zero drift and span drift
Quantity of sample	About 3L/min
Method of correction	manual automatic:(0~**9 hour)
Gas revise	Zero gas **0%N2 standard gas Span gas SO2 in N2 standard gas NO in N2 standard gas O2 in N2 standard gas or air)
Enable condition	Temp.:5 ~ 0Â°C.Humidity:*5%RH below, no radiation Direct sunlight, the place with more vibratory
External input and output	Applied in the circumstance of power-off, maintenance, analyzer alarm, correction and others
Voltage	AC*0VÂ±2V,0/0Hz(optional)about *0A
size	overall dimension drawing for reference
weight	About **0Kg
Material of connected parts	Polyethylene, glasses, Teflon, Viton
Await sample gas pressure	1Kpa ~ 1Kpa
Standard sample gas	Temp.:0Â°C below Dust:0.1g/Nm3 SO2:0mg/m3 below NOx:*0 mg/m3 below H2O:0.8 ~ 0wt%
Storage	Surrounding Temp.:*0 ~ 0Â°C Humidity:*0% below Others: cannot be stored in the air of corrosive ( shall open the package, on the breezy place

APPLICATION FIELD:

Monitoring the waste gas emission from Power Generation, Thermal Power, Iron and Steel, Petrochemical, Cement, Waste Power, Desulphurization and Denitrification, Tobacco, Paper and so on.