Description

Hello,
 
Do you know the LED Lamp with Bluetooth Speaker? 
 
It is a very hot selling Product in ***3 , can use in parlour,bedroom,studyroom,kitchen,bathroom, passageway ect.
And let you experience music and LED lighting from one system
 
Price is only USD*0.
 
If you have interest, please feel free to contact us.

Best Regards
Ada

WIDE TECHNOLOGY CO., LIMITED
Skype: widelaptop

The LED lighting with Bluetooth audio combines LED energy-saving lighting and sound technology together. The outer ring is the ring luminescence band, which can brighten the light of warm white or cool white. A small-caliber and high-powered full-range speaker is located in the middle area, and music player rise well. Bluetooth audio receiver is suitable for all kinds of products with Bluetooth, such as mobile phone, MID, notebook etc.

Speaker:4Ω 5W
Interface:E*7
Amplifier:Class D
Signal input:Bluetooth.2.4G Bluetooth transmission Bluetooth transmit distance:*0 meters
Bluetooth connection password:***0
Signal output:*****5K audio signal
Working temperature:**0??*0?
Working voltage:AC******0V    Life>****0 hours    Lampshade size>5 inch
Environmental protection level?No mercury pollution  Application:parlour,bedroom,studyroom,kitchen,bathroom, passageway.   

Instructions of use
1.1  Each package contains a host of LED lighting with Bluetooth audio, an infrared remote control, manual and warranty card;
1.2  Open the box, and remove the host and the remote control;
1.3 Turn off the switch, screw the host into E*7 socket, and tighten it a little harder. Turn on the light LED lights after around 1 second (brightest state). At this time, the audio features in the standby state.
1.4 Remove the insulating film in the battery compartment of remote control, the power of remote control is energized. At this point, the host can be controlled by the function keys on the remote control.
1.5 Hold down the Bluetooth pairing key to be when you see the blue color flash on the host, release the button. At this point, the Bluetooth of host is in pairing. Open the Bluetooth device which need connect find automatically to be a “xxx” Bluetooth devices display, connect the matching. When blue LED of the host light and dark flash slowly, the Bluetooth pairing is successful.
1.6 The host will remember automatically the connected device without matching again, after pairing is successful. When access to the new Bluetooth device, repeat the 3.5 process. The host will record the last paired device automatically.