Sell Fpp oval gear flow meters

Description

The TM series flow meters are mini oval gear flow meter, can measure from 0.*2 GPM (0,1 LPM) up to *0 GPM (*6 LPM) in its different models. The TM series flow meters have inlet/outlet sizes from ¼”, 3/8”, ½” and ¾”, anodized aluminum or stainless steel body, low drop pressure aprox. 3,5 PSI (0,2 BAR), without metal to metal contact inside the measuring chamber, with a lot of electronics registers options. The TM series is specially used for additive injection service, low flow industrial process, fuel consumption systems, monitoring flow lubricants to critical bearing in rotating equipment, small volume batching, etc. Repeatability: +/- 0.*5%. Linearity: + / - 0.5% (0.*5% with Electronic improvement). Anodized aluminum or Stainless Steel body. Maximum pressure allowable of **6; 1,**3 y 2,**0 PSI at **0°F (*8; **3 y **3 Bar at *8°C) depending on models (Safety Factor 3:1). Approvals: CE mark, UL, cUL y ATEX. Operating Temperature Range: **0°F to **2°F (**0°C to **0°C). Range of measurement as models: 0.3GPM; 3GPM; *0 GPM and *0GPM for 1cSt (1,1 LPM; *1,4 LPM; *8LPM y *6 LPM). Connection options: NPT, BSP, ANSI **0 floating flange. Electronic flow meter sensor option: Hall Effect, Quadrature Hall Effect or Reed Switch. Seals: Viton or Teflon. The TS series flow meters are a kind of oval gear flow meter. All models are NTEP certificated for Custody Transfer service in US (knew than NIST before). The meters can measure from 4 GPM (*5 LPM) up to **4 GPM (1,**0 LPM) in its different models. The TS series flow meters have inlet/outlet sizes from ¾”; 1”; 1,5”; 2” and 3”, anodized aluminum or stainless steel body, without metal to metal contact inside the measuring chamber and it is available in several configuration variety that include strainer, air eliminator, preset valve, mechanics register, electronic registers and so on. With only two moving parts has exceptional low drop pressure characteristic aprox. 0,*7 - 0,*7 PSI (2,5 - 4 BAR). Repeatability: +/- 0.*5%. Linearity: + / - 0.*5%. Anodized aluminum or Stainless Steel body. Maximum pressure allowable of **0; **0 and **0 PSI at **4°F (*0; *4 and *8 Bar at *0°C) depending on models (Safety Factor 3:1). Approvals: Custody Transfer NTEP, CE mark, UL, cUL y ATEX. Operating Temperature Range: **0°F to **2°F (**0°C to **0°C). Range of measurement as models: *0 GPM; *0 GPM; **0 GPM, **0 GPM and **0 GPM for 1.**0 SSU (**0 LPM; **0 LPM; **0 LPM, **0 LPM and 1,**0 LPM for **0 cP). Connection options: NPT, BSP, ANSI **0 flange. Electronic flow meter sensor option: Hall Effect, Quadrature Hall Effect. Mechanics meter with pulse output optional. Seals: Viton or Teflon.