Description
We are specialized supplier of complete set of autoclaved aerated
concrete (AAC) plant with capacity from ****0m3/year to
*****0m3/year, including plant design, equipments installation,
technical instruction, personal training, etc.,
Introduction:
We are specialized supplier of complete set of autoclaved aerated
concrete (AAC) plant with capacity from ****0m3/year to
*****0m3/year, including plant design, equipments installation,
technical instruction, personal training, etc., and also we design
and manufacture as per clients' requirement.
AAC block is a siliceous material (sand, fly ash or silicon
tailings such as waste porcelain clay, stone processing waste
materials, blast furnace slag, etc.) and calcareous materials
(lime, cement) as the main raw material, mixing fat gas agent
(aluminum powder), by ingredients, mixing, casting, pre-raising,
cutting, autoclave, curing process made of light porous silicate
products, because by the hair contains a lot of gas even after the
small pores, hence the name of aerated concrete.
Advantage:
1. Lightweight:
Porosity achieve *0% to *5%, volume density is generally **0 ~
**0kg/m3, as 1/5 of general concrete the 1/4of clay, the 1/3 of
hollow brick, and similar with wood can float in water. It can
reduce building weight, reduction in the cost of integrated
building.
2. Fireproof:
Most of the major raw materials is inorganic materials, so it has
good fire resistance, and do not emit harmful gases when meet fire.
Fire **0 degrees, as a refractory material, the thick up of *0mm
walls can reach to **5 minutes fire resistance, **0mm thick up wall
can reach to **0 minutes fire resistance.
3. Sound insulation:
Due to a unique porous structure, so it has a sound absorption
capacity. The sound absorption capacity can reach of *0mm thick
wall up to *1 db.
4. Heatproof:
As the material inside has a large numbers of the pores and porous,
which has a good thermal insulation properties. The Thermal
conductivity is 0.***0.*6W/MK, as 1/**1/5 of brick. Typically, the
insulation effect of *0cm thick aerated concrete wall is equivalent
to *9cm thick solid brick walls ordinary.
5. Permeability:
Result of material by the composition of many independent small
pores, the moisture absorption is slow, in the volume of absorbent
is 5 times of clay saturation do. When used in the bathroom, the
wall can be treated to interface directly paste tiles.
6. Anti-seismic:
The same building structure, improve the two seismic than the brick
level.
7. Green:
Manufacturing, transportation, all use the process of pollution, to
protect arable land, saving energy, is one kind of a green building
material.
8. Durability:
material strength is stability, in the specimens tested after one
year of atmospheric exposure; the intensity increased by *5%, and
remained stable after ten years.
9. Shortcut:
it has good machinability, can be sawed, planed, drilled, nailed,
and available appropriate as bonding of adhesive material, so
create favorable conditions for building construction.
*0. Economies:
An integrated lower cost than using more than 5% of solid clay
bricks, and can increase the usable area, greatly enhance the
utilization of floor space.
