Crane Grab By Henan Crane Co., Ltd., China
Pas encore membre de TradeKey.com? Inscrivez-vous pour vous connecter avec 9 millions d'importateurs et exportateurs.
Rejoignez-le maintenant c'est gratuit |
BOOK A CALL
Book Call On Your Favorite Time

By Signing Up. I agree to TradeKey.com Terms of Use, Privacy Policy, IPR and receive emails related to our services

Contact Us
Crane Grab

Crane Grab

( Negotiable )

|

Minimum Order

Localité:

-

Prix de commande minimale:

-

Commande minimale:

1 Set

Packaging Detail:

bared

Delivery Time:

20 working days after payment advance

Supplying Ability:

100 Set per Month

Payment Type:

L/C, T/T

Contacter maintenant
Membre gratuit

Personne à contacter Mr. Jack

North Side of Xin-Chang Road, Xinxiiang, Henan

Contacter maintenant

Description

Brief Introduction

- Four-rope paina grab is of new design, reasonable structure with dead weight ratio of material grabbed and grab to be 1.5~1.*2 and full capacity of *5~**0% that is a wonderful grab for loose material of small pencil.

Advantages

- Comparing to the traditional four-rope grab, the four-rope paina grab has following advantages:

1. the lower support beam is shorter, with well strength and light dead weight.

2. bush material for the main point is of bearing steel, that service life will pre-long 4~5 times.

3. distance between edge plate is small (0.3~1mm) that can keep the work area to be clean.

4. stable structure that can be easy installation and operation.

Main Technical Parameter

- Volume: From 1 to *0 m3;

- Type: It can be divided into light, middle and heavy type according to the material it will be grabbed;

- Material gravity: It can be used for almost all material as coal, ore and so on;

- Weight of material to be grabbed: The max. Weight of material to be grab is *0t, and we can design and manufacture according to your requirements;

- Pulley ratio: The pulley ratio of this type of grab can be 4, 5 or 6;

- Number of rope for open-close: 2;

- Number of rope for hoist-lower: 2;

- Wire rope diameter: Changed from *4mm to *8mm, or according to your work requirements;

- Pulley diameter: Ranged from **0mm to **0 mm, or according to your work requirement;

- Times needed for open-close: About *4s;

- Max. Open size: From 1.8m to 5.0m;

- Other technical parameter: Other parameter can be designed and fabricated according to real requirements.

Manufacture Period

- Manufacture period for one set of such grab is *0 working days after receiving the payment advance;

Package and Transportation

- The four-cable grab can be transported by container, bulk cargo or train with main structure naked or covered by rain-proof clothes.

Payment Terms

- Negotiable.

 

Send a direct inquiry to this supplier

To:

Mr. Jack < Henan Crane Co., Ltd. >

Je veux savoir: