Sell PIR Motion Sensor Switch for LED Lights

Description

Adjustable Infrared Motion Sensor Light Switch,Ceiling Mounted PIR Sensor Switch, Infrared Ray Induction Sensor Switch  

Instruction

The product adopts good sensitivity detector, integrated circuit. It gathers automatism, convenient safe, saving-energy and practical functions. It utilizes the infrared energy from human as control-signal source, it can start the load at once when one enters detection field. It can identify day and night automatically. It is easy to install and used widely.

Adjustable Infrared Motion Sensor Light Switch

SPECIFICATION:

Power Sourcing: **0V/AC***0V/AC            

Detection Range: **0°
Power Frequency: *0Hz                       

Working Temperature: **0~**0°C
Ambient Light: *****0LUX (Adjustable)         

Working Humidity: <*3%RH
Time-Delay: min.*0sec±3sec                  

Installing Height: 2.2m~4m
Max.7min±2min                   

Power Consumption: 0.*5W (work) 0.1W (static)
Rated Load: ***0W (incandescent lamp)    **0W (energy-saving lamp)                     

Detection Motion Speed: 0.6~1.5m/s
Detection Distance: 6m max (<*4°C)

Ceiling Mounted PIR Sensor Switch

INSTALLATION: (as following drawing.):

1.Turn off the power.
2.Moving the transparent vinyl cover what is in the bottom of the sensor.
3.Loosing the screws in the connection terminal, connecting the power and rated load to connection terminal of sensor according to connection sketch map.
4.Tighten the screws; put the transparent vinyl cover into the original station.
5.Folding the metal spring of the sensor to upwards, until they are in “I” position with sensor, then put the sensor into the hole or installation box what is in the ceiling, the size is similar with item. Releasing the spring, the sensor will be set in this installation position.
6.After finishing installing, the sensor could be connected the power and testing it.