FOB Price
Obtenir le dernier prix( Negotiable )
|Minimum Order
Localité:
-
Prix de commande minimale:
-
Commande minimale:
100 Piece
Packaging Detail:
Bulk package
Delivery Time:
35 days
Supplying Ability:
10000 Piece per Day
Payment Type:
PayPal, Money Gram, Western Union, L/C, T/T
Personne àcontacter Ms. Phoenix
Longhua, Shenzhen, Guangdong
HDMI Extender Over single **0m Coaxial Cable with IR Control, hdmi extender, hdmi extender **0m
I. Introduction
The HDMI extender over 1 coaxial cable with IR control is the right way to send your HDMI signal
over long distances. Instead of using expensive HDMI cables, this device lets you use your existing
coaxial cables/sockets while also performing the same functions like transferring Deep Color (*2 bits/color) video, all with a bandwidth up to **5MHz. And if that weren’t enough, you can use your existing remote to control your device through an IR blaster.
II. Features
1. Compliant with HDMI 1.3, HDCP 1.1 standards.
2. Supports digital video formats in Deep Color Mode at up to *6 bits (*2bits/color) and *8KHz LPCM Digital audio.
3. Equalizes and recovers incoming TMDS data before re-transmitting it in high quality, regardless of the incoming signal quality.
4. Super IR control system, IR transport channel can be forward or backward.
III. Package
1. HDMI Transmitter 1Pcs
2. HDMI Receiver 1Pcs
3. IR Tx cable 1Pcs
4. IR Rx cable 1Pcs
5. 5V1A DC Power Supply Adaptor (2 Pcs)
6. Product Manual
IV. Specifications
HDMI Transmitter ports 1 x HDMI,1x IR Tx, 1xBNC
HDMI Receiver ports 1 x HDMI,1x IR Rx, 1xBNC
Power Supply 2x 5V1A DC
ESD Protection Human body model ±8kV (air-gap discharge) ,
±4kV (contact discharge)
Dimension *0mm x *1mm x *5 mm
Weight **0g
Operating Temperature 0°C ~ *0°C / *2°F ~ **4°F
Storage Temperature **0°C ~ *0°C / *4°F ~ **0°F
Relative Humidity *0 ~ *0% RH (Non-condensing)
V. Connect and Operate
Connect the signal source such as Blu-Ray Player, Play Station 3, audio/video receiver, cable or satellite receivers equipped with HDMI
output interfaces with a short high-speed HDMI cable to the HDMI Transmitter input.
HDMI cable length should not exceed *6 ft.
Connect the HDMI Transmitter output BNC ports using single RG6 coaxial cables to included Receiver.
It is strongly recommended that factory terminated cable assemblies be used and their length shall not
exceed **8 ft respectively.
Connect the HDMI output from the Receiver to high-definition display devices such as HD-LCD, HD-DLP and HD projectors with HDMI input interfaces. Use high-speed HDMI
cables that are recommended for the distances that are required for each connection. HDMI
cable length should not exceed *6 ft.
The source can be controlled from the display. This is accomplished by using an optional IR Receiver
pigtail pointing away from the display, which can be connected to the receiver portion of the extender.
The IR Transmitter pigtail is then connected to the Transmitter of the extender and pointed at the source.
