Description
Brief Introduction
Wall
traveling cantilever crane is of small type of lifting equipment
with capacity from 0.*5t to *0t, which is mainly used in workshop
where upper and lower (double layer) lifting equipment needed and
the crane with less capacity on the lower side to load
goods.
It can
be installed on the column of workshop or the steel rail separately
to work along with crane of large capacity on the upper layer and
not affect it as well.
The
control voltage can be *6V or your requirement.
Control method for it can be pendant, remote or
operator cabin.
It has
such advantages as easy in installation and maintenance, flexible
operation, safety and reliability.
Technical Specification
-
lifting capacity of wall traveling cantilever crane can be 0.*5t,
0.5t, 1t, 2t, 3t, 5t, *0t, *6t, *0t or your
requirements.
-
lifting height of it can be 3m, 7m, *0m, *0m, or so on
required.
-
lifting speed can be 8m/min, 0.8/8m/min or real
requirements.
-
working duty of it is M3 or M5 (ISO standard).
-
crane traveling speed can be *0m/min or real
requirement.
- max.
upright wheel load is depend on the specification of crane
needed.
- max.
level wheel load is depend on the parameter of crane.
-
steel rail for it is P*4 (*4kg/m) or P*8 (*8kg/m).
-
power supply for the crane is of AC, 3ph, **0V/**0V/**0V/ **0V,
*0Hz/*0Hz or real power at site.
In one
word, all technical specification can be designed and manufactured
according to real requirement of workshop.
Material for Crane Construction
-
material for general crane construct like arm and so on is Q**5B,
which should be changed into Q**5B when the limit temperature is
below **0 centigrade.
- hook
is forged casting steel or customer’s required.
-
steel rope is flexible one or customer’s required.
- slew
bearing for jib crane is LYC, HRB or other well-know
ones.
Component Used on Crane
-
electric motor is well-known one in China, like Jiamusi or other
international one like ABB, SEW and so on as customer’s
requirement.
- such
important electric components as breaker, contactor, and fuse are
of Schneider, Siemens and so on.
-
other ones can be followed according to our customer’s
requirement.
Package
-
steel arm and other large components covered by rain-proof
clothes.
-
other components like electric motor, electric hoist, cable and so
on in plywood box.
- some
other package methods which will benefit our product will also be
appreciated.
Delivery
- delivery
time for the crane is *0 working days after payment
advance.
HS
code
- *****0
Shipment
-
dispatch port can be Shanghai Port, Tianjin Port or some other
China port suitable for loading of such equipment.
- open
top container will be recommended for the crane.
- LCL
(less container load) shall be suggested for you if only one or two
sets of crane ordered to save freight.
- we
can recommend our forward to our customer, and the forward
appointed by our customer is also appreciated.
……
Generally speaking, the wall traveling cantilever
crane can be totally designed according to your real
requirement.
Your
comments or other question will be much appreciates.
