Description
1. Technical
parameters
Voltage (V): **0V
Frequency (Hz): *0Hz
Power (P): **0W
Welding speed (V): 0.**5m/min
Heating temperature (T): ****0℃
Thickness of material to be welded:
0.2mm*1.5mm
Overlap width: **0mm
Welding width: *2.5mm×2, interior cavity
*2mm
Seam strength: ≥*5% base material (tensile
resistant in shear direction) ,complete machine
Weight: 5Kg
Insulation class: class II
2.
Precautions
1). For correct operation, please
carefully read this instruction.
2). Use with grounded *-cords mains
cable and socket (socket with *0A capacity. On the corresponding
welder, phase L connected to live wire, N to zero line, phase ╧
to grounded protection line), plug will not be modified without
prior permission.
3). For good welding quality, please
assign specified personnel for operation.
4). Pressure roller will not engage on
free running.
5). Do not operate when it is exposed
to water to prevent inferior quality.
6). The machine has been regulated
before leaving factory. Please do not adjust it at
will.
7). Circuit board in control box is
live with electricity, do not remove it without prior notice to
authorized personnel.
8). Preheat for *0 minutes before
start up if machine has been long unused or exposed to
moisture.
9). Modifications may be made for
continuous improvement, without prior notice.