Description

2. Clamping Unit System  The machine adopts hands type of operation, which can guarantee the safety in the operation  The pressure and speed of the clamping system are adjustable  It uses the imported WIKA shockproof meter to indicate the compound die pressure  Five-cylinder integral type clamping unit system  It has the soft clamping unit function. 3. Injection System  The injection pressure and the injection speed are adjustable  The machine uses the imported WIKA shockproof meter to indicate the injection pressure  The machine is equipped with the MGP function 4. Temperature Control System  Single point of control with *2 temperature points  The machine can alarm when the temperature is abnormal 5. Electrical Control and oil hydraulic System  It is equipped with the hydraulic motivation and electric heating system. And the power supplies exist separately which can avoid the mutual interference.  The control voltage uses the low voltage mode  Equipped with the emergency stop button  It can alarm with display the warning light when the temperature and position of oil goes beyond the normal range.  The oil-way and control valve centralized design, which gains a good cushioning effect. 6. Others  Equipped with three-side shield to ensure the safety and cleaning. Furthermore, it alarms and displays the warning light when the machine is not in the good working order.  Security light curtains maintain the safety production  The table-board threadï&frac*4;Œejector rod position, and the sizes of injection bar and thermocouple connection can be customized.  Power supply: **0v *0Hz  Heating electric power: **0/**0v *0Hz  Equipped with the independent lighting switch/LS  Equipped with two plugs(**0v/*5A & **0v/*5A)  It is convenient to operate and change the mould  The noise ≤*0 db  The standard color of machine: half white half blue