Description
Align T-REX **0E 3GX Super Combo KX*****8AT RC Helicopter
(Motor/Servos/ESC/3GX)
What's included:
T-REX **0E V2 3GX Kits Set X1
Aluminum Tail Boom X1
RCE-BL*0G Brushless ESC x1
**0 Carbon fiber blades X1
DS**0 Digital servoX3 set
DS**0 Digital servo X1
3GX Flybarless System X1 set
**0MX Brushless Motor X1
*0mm 3K Carbon Fiber Tail Blades X1 Set
Instruction(3GX Programmable Flybarless System) :
Brand new redesigned 3GX represents a new generation of multi
function flybarless system. The dramatically improved performance
will create immediate impact on any enthusiasts.
3GX is currently the smallest and lightest flybarless system on the
market. Two ports to directly connect Spektrum and JR satellite
receivers, along with full support of Futaba's S-BUS system.
Based on the 3G FL**0 manual setup process, the 3GX can be setup in
a few minutes through a simple process. In addition, the 3GX can
support all of the CCPM swashplate system currently on the market
including *0, **0, **5, and **0 degrees swashplates.
Graphical illustrated instruction on the computer setup software
directs the user through a step by step setup process, allowing for
quick setups without omitting any steps.
Support Bluetooth connectivity. With the soon to be released
Bluetooth connectivity kit, 3GX can be programmed wirelessly from a
PC. Eventually there will also be smartphone apps allowing live
adjustments to 3GX without powering down.
With 3GX's built in Align RCE-G**0 governor function, no external
governor is needed to reduce electronic wire clutters.
A library of pre-configured 3GX settings specifically available for
T-Rex series of helicopters, allowing pilots to achieve the most
optimal setup for their helicopters.
Three levels of flight mode is available on the 3GX to provide
different feels from beginners to advanced pilots.
Custom parameters have been opened up in 3GX to allow pilots to
fine tune numerous settings for swashplate and rudder. Settings
export feature allows custom settings to be shared amongst
friends.
3GX utilizes brand new gyroscope sensors of the highest
specifications when compared to other flybarless systems currently
on the market, allowing it to be used under harsh conditions. Dual
axis plus rudder sensor dramatically improves swashplate and rudder
correction precision compared to last generation 3G. This is
clearly noticeable in stable hover as well as highly aerobatic
routines.
Suitable for helicopter of all class from **0 to **0, glow engine
or electric powered. The superior vibration resistant
characteristic is evident even when mounted with harder double
sided mounting tape.
3GX utilizes *6 bit processor which is 4 times faster than previous
generation, along with a completely re-written firmware. The result
is a dramatic stability improvement from previous generation, with
stability that rivals a flybarred helicopter, yet posses explosive
agility.
With built in pirouette compensation function, 3GX is able to
stabilize the helicopter on a fixed point during pirouetting
maneuvers. Pirouetting flips type of maneuvers are easily
accomplished with precision.
3GX's rudder control is similar to the high end GP***0 gyro in that
rudder sensitivity is catered specifically for the helicopter's
rudder response characteristics, allowing consistent rudder feel
even under high speed conditions. This excellent control feel will
allow pilot of all skill levels to experience the perfect
integration between 3GX and helicopter.
Additional peripherals planned for the 3GX includes *-axis
accelerometer, *-axis magnetic compass, and GPS positioning system.
While the commonly available position hold gyro system utilizes
only 6 sensors, 3GX’s total of *0 sensors ensure positioning of
helicopter with superior accuracy, providing the ultimate solution
for aerial photography or other special purposes.
?Operating Temperature:**0~*0 degree
X and Y axis Operating Angle Range:***0~***0 degree
Z axis Operating Angle Range:***0~***0 degree
Size:*6.5x*5.2x*5.6 mm Size
Weight*1g Weight
Supports Wide/Narrow Bandwidth Digital and brushless servos
Spektrum and JR Satellite antennas support (Replaces original
factory receiver)
Futaba S.BUS system support
Built in governor function
Maximum working voltage:8.5V
Compatible with ***4/***8 resolution Spektrum receivers
Supports *0/**0/**5/**0 CCPM swashplates
Field setup without the use of a PC
Compatible with 2 to 5 blades rotor heads
Support up to 6 servos
Automatic servo type recognization
Specification(T-REX **0E V2) :
Features
1. Newly designed aerodynamically efficient metal main blade
control system, with high rigidity and superior control
precision.
2. New lightweight high precision main gear, with excellent balance
and stability.
3.The most optimal motor pinion ratio and tail gear ratio to
achieve the most efficient power output and flight characteristic
.
4. New lightweight rigid metal main shaft bearing blocks.
5. Integrated swash anti-rotation guide and gyro mounting
platform.
6.Brand new CNC machined metal tail gear box, with thicker side
plates to increase rigidity. The more streamlined design also
allows for simpler disassembly .
7. Dual section battery mount for optimal CG position based on
battery weight.
8. 3K carbon fiber side frame and base plate, simple yet highly
rigid for ease of maintenance.
9. High quality 5mm carbon rod and CNC metal tail scissor control
arms are used in rudder control system to improve rudder lockingand
control effectiveness.
*0. Newly designed rear mounted rudder servo mount, for pleasing
aesthetic as well as improving side frame strength and protection
to the rudder servo.
*1. High speed rated thrust bearings in tail blade grips.
*2. High efficiency torque tube drive.
*3. Additional radial bearing is added to the one way bearing block
to ensure smooth rotation, and eliminate jammed one way
bearing.
*4. High strength carbon fiber used on tail fins and tail boom
supports.
*5. New lightweight landing gears.
*6. High grade airbrushed fiberglass canopy.
Specification(3GX Programmable Flybarless System) :
Operating Temperature:**0~*0 degree
X and Y axis Operating Angle Range:***0~***0 degree
Z axis Operating Angle Range:***0~***0 degree
Size:*6.5x*5.2x*5.6 mm Size
Weight*1g Weight
Supports Wide/Narrow Bandwidth Digital and brushless servos
Spektrum and JR Satellite antennas support (Replaces original
factory receiver)
Futaba S.BUS system support
Built in governor function
Maximum working voltage:8.5V
Compatible with ***4/***8 resolution Spektrum receivers
Supports *0/**0/**5/**0 CCPM swashplates
Field setup without the use of a PC
Compatible with 2 to 5 blades rotor heads
Support up to 6 servos
Automatic servo type recognization
Specification(T-REX **0E V2) :
Length: ***2mm
Height: **6mm
Main Blade Length: **0mm
Main Rotor Diameter: ***8mm
Tail Rotor Diameter: **4mm
Motor Drive Gear:*6T
Main Drive Gear:**0T
Autorotation Tail Drive Gear: **1T
Tail Drive Gear: *4T
Drive Gear Ratio: 1:*0.*2:3.*5
Weight(With Motor): ***0g
Flying Weight: Approx. ***0g
Accessories:
T-REX **0E V2 3GX Kits Set X1
Aluminum Tail Boom X1
RCE-BL*0G Brushless ESC x1
**0 Carbon fiber blades X1
DS**0 Digital servoX3 set
DS**0 Digital servo X1
3GX Flybarless System X1 set
**0MX Brushless Motor X1
*0mm 3K Carbon Fiber Tail Blades X1 Set
Radio transmitter and electronic equipment required for
assembly:
Transmitter(*-channel or more, helicopter system)
Receiver(*-channel or more)
6S Li-Po ***0 ~ ***0mAh
Dial Pitch Gauge
