FOB Price
Obtenir le dernier prix10000 ~ 100000 / Piece
|Minimum Order
Localité:
Qingdao
Prix de commande minimale:
Commande minimale:
1 Piece
Packaging Detail:
Standard packing
Delivery Time:
60days
Supplying Ability:
60 Set per Year
Payment Type:
Western Union, L/C, T/T
Personne àcontacter ailleen
linggang road, linggang parking industry,jiaonan, Qingdao, Shandong
Usage
QG Series Steel pipe Shot
dedicated processor inside and outside the wall for the steel and
steel products to deal with the outer surface of the shot blasting
to remove the oxide layer and debris such as welding slag, showing
a metallic luster, to increase their surface area in order to
facilitate the work painting and painting.
Characteristics:Blast wheel arranged in a suitable location (such
as room or the side of body below), the workpiece edge to edge into
the rotation, will enable the different effect of diameter of the
pipe line Shot
We go further...
In the case of this type of equipment (Based on user requirements),We designed based on the Siemens (SIEMENS) panel of human-machine interface operation. Production process, the pill is expected of the circulatory system (pill sand separator, bucket elevator, screw conveyor, pellet controller, etc.), shot blasting, and mechanical and electrical transmission system, speed, etc. can be found in the state of the intuitive user interface display out. This software is also available via Profibus Siemens and other companies to exchange information on products, factory-level production process to achieve the sharing of information
Steel pipe surface shot blasting machine man-machine interface
Technical parameters of this type of equipment:
Workpiece diameter:Ø******0mm
Length:>6m
Clean-up speed:0.5~4m
Can be more than one series, to achieve a higher clearance rate
Introduction
Protecting plate
The cabinet of main impacting district has the high wear-resistant
steel manganese *3.This protecting plate is our new research,
installing more simply and repairing more conveniently.
Sealed steel import and
export
Given the specific characteristics
of the workpiece cleaning, shot blasting machine designed for quick
exchange of the door of the chamber body. When the clean-up of
large-diameter workpiece, the replaced door Sandy; When cleaning
small diameter of the workpiece when the door to put on small-bore.
This could very well seal.
Workpiece drive
mechanism
Shot blasting machine of this type can be assigned a variety of
workpiece drive mechanism,Such as Tire,V-Ramp Roller and so
on.
Blast wheel
This machine’s blast
wheel installed in the suitable location of the cleaning
cabinet(Side or Top). It can be very good clean-up different
diameter of the workpiece.
Shot recycling & purifying
system
This system can be divided into
the Abrasive recycling system and purify System, they consist of
abrasive hopper, Abrasive conduit, shot valves (Blast wheel
Assemblies), screw conveyors, bucket Elevator, abrasive /dust and
separator, etc.
Dust-removing system
This system consists of collector,fan and connecting pipes(from the
clean-up room,separator to the collector) and so on.
Connecting pipe equipped with butterfly valves for regulating the
air volume, so that the work of the various parts of equipment to
achieve the best state, so that no dust in the course of their work
spillover.
Another form of Steel pipe surface shot blasting machine. Two Shot Blast wheel in the browser layout of the upper body. Work side of the workpiece while rotating through the shot blasting clean-up room.
