Sell Elevator Weighing Controller DTZZIII-SK

Description

TYPE: DTZZIII-SK series

APPLICATION RANGE: permanent magnet synchronism passenger elevator which has engine room, rope hitch plate solution, wheel and axle install solution.

SERVICE VOLTAGE: AC**0V

OUTPUT MODE:4 set&8 state relay contact output、operation point adjustable

ANALOG QUANTITY: 0~*0mA **0~*0V 0~*0V 4~*0mA selectable

PAYLOAD RANGE: **0kg~***0kg
FEATURES AND PARAMETERS ABOUT THE SENSOR

Integration structural design, CrNiMo alloy material, correspond the IP*5 request, totally adapt to hi-humid environment. Overload capacity**0%, line output accurate, load range for each sensor is **0kg~***0kg

SYSTEM FEATURES

*-position Nixie Tube display

It could show the rated load percentage of the elevator and the storey.Use conveniently.

Reliable anti-jamming

The system uses optical isolation technology, non-interfering for multi-elevator running. The door status up directionleveling signal are adapt to contact signal input. Either high level or low level is OK.

Free setting in site

Free set the rated load tonnage of elevator or read the actual weight of elevator as rated load tonnage

Multiple adjustment methods

No need for weights self-learning, full load self-loading and remote debugging facility

No inertia error alarm while running

The controller detect and control output while the door open. No detect and control while elevator rise or fall.

Bug self-diagnosis

When the controller or the sensor break down or in off-position, the system could output overload contact signal automatically

Free adjust in site

Adjust system in 1:1 or 1:2 mode

Offer various of communication interface

According to need, CAN or **5 and other kinds of communication interface could be provided to system.

Sensors in free match

You can free match diversified sensors from our company and connect *2 sensors through sensor expand module.

OPTIONAL FUNCTIONS

â‘ Far-end display   inside installation, it will show load capacity in real-time inside the elevator according to need.

â‘¡Voice hint function   inside installation, it will prompt load capacity by voice inside the elevator according to need

COMMUNICATION INTERFACE: RS**5、CAN selectable