Feature:
They are
the most typical rolling bearings with extensive applications. The
raceways in both of the rings are in arc groove form, which can
carry radial and axial load in double directions. They can be
applied in situations where high-rotating speed and low noise and
low vibration are required.
Cages:
Deep
groove ball bearings generally use pressed cages of steel sheet or
brass cages. When the outer diameter is less than (inclusive)**0mm,
they use pressed cage with steel sheet. When the outer diameter is
bigger than **0mm, they use brass cages.
Applications:
Can be
found in automobiles, machine tools, motors, instruments, construct
machines, railway vehicles, agricultural machines and various other
special machines
Types:
Basic
type, With snap ring groove on the outer ring(-N), With one
shield(-Z) on one side or two shields(*2Z) on both sides, With one
seal(-RS)on one side or two seals(*2RS)on both sides.
Model |
Old
Model |
Boundary dimensions (mm) |
Basic load ratings (KN) |
Limiting speed (r/min) |
Weight (KG) |
d |
D |
B |
Rsmin |
dyc_Cr |
stc_Cor |
Grease |
Oil |
**9/***0 |
****9/***0 |
***0 |
***0 |
**5 |
9.5 |
***5 |
***0 |
- |
- |
***0 |
*0/***0 |
1/***0 |
***0 |
***0 |
**3 |
*2 |
***5 |
***0 |
- |
- |
***0 |
**8/***0 |
****8/***0 |
***0 |
***0 |
**0 |
7.5 |
***0 |
***0 |
- |
- |
**0 |
**9/***0 |
****9/***0 |
***0 |
***0 |
**5 |
9.5 |
***0 |
***0 |
- |
- |
**2 |