FOB Price
Obtenir le dernier prix68000 ~ 80000 / Set ( Negotiable )
|Minimum Order
Localité:
CHINA
Prix de commande minimale:
Commande minimale:
1 Set
Packaging Detail:
Standard exportation package
Delivery Time:
30 working days after receiving deposit
Supplying Ability:
5 Set per Month
Payment Type:
T/T, L/C
Personne àcontacter sally
ZHENXING ROAD, Zhangjiagang, Jiangsu
|
Model
|
Screw diameter
|
L/D
|
Extruder
Qty. |
Pipe range
|
Capacity
|
Main motor power
|
Total power
|
Line
length |
|
PEx-AL-PEX*2
|
*5mm
|
*5:1
|
2
|
****2
|
*****0
|
*1
|
*0
|
*5
|
|
*0mm
|
*8:1
|
2
|
*8.5
|
|||||
|
PEx-AL-PEX**3
|
*0mm
|
*5:1
|
2
|
****3
|
******0
|
*8.5
|
**0
|
*0
|
PEX-AL-PEX pipe production line
HDPE-AL-HDPE pipe productin line
HDPE-AL-PEX pipe production line
PERT-AL-PERT pipe production line
Over-lap type for welding
method
PEX-AL-PEX pipe is
five-layer composite pipe that combines the advantages of a metal
and plastic pipe and eliminates the disadvantages of both materials
at the same time.
The aluminum core is absolutely diffusion tight; it reliably prevents oxygen/gases from permeating into pipe.
Multi-layer composite pipeconsists of
overlapped aluminum core with an inner and outer layer of
high temperature-resistant polyethylene. All layers are
permanently bonded together by intermediate adhesive layers.
PEX AL PEX application
Cold and hot water
distribution.
The smooth inner of
PEX-AL-PEX pipe prevents deposit accumulation and corrosion,
leading up to *0% more flowing than metal pipe. pipe is easy to
bend and install directly to girder or inside wall and cement
concrete, while can be found with a simple metal detector. The
combination of plastic and metal makes PEX-AL-PEX tubing a
permanently reliable system for its use in all common hot and cold
water installation.
Solar system, air-conditioning and
refrigeration system.
Never turns frost. High thermal preservation
lowes the cost of temperature keeping and improves the efficiency
of these systems.
Underfloor heating PEX
systems.
Stable form in bends and over a distance.
PEX-AL-PEX pipe can be directly installed up to **0 meters without
any fittings. It works well in a wide range of temperature from
**0°C to *0°C.
Gas and air
distribution.
The aluminum layer
allows Ardi PEX-AL-PEX pipe to stand high working pressure and
prevent oxygen/gases from permeating into pipe. PEX-AL-PEX tube is
freely bent that makes the use of numerous fittings unnecessary.
PEX-AL-PEX pipe is your safe and reliable choice of compressed air,
gas and oxygen supply.
Main
characteristics
Burning
resistant
ThePE(X)-AL-PE(X)composite structure makes Ardi pipe a much better burning resistance than polyethylene pipe. Tested by the State Quality Supervision Test Center for Fireproofing Building Material, the burning resistance of Ardi pipe measures up to Grade B1 of GB***4, stipulations for wire and cable conduit plastic material.
PEX-AL-PEXCorrosion resistantThe smooth inner and outer plastic layers hold water at bay- preventing deposit accumulation and corrosion. At normal temperature, it can withstand all kinds of acid, alkali, and salt solution.
Low thermal conductivity0.*5W/m.k, about 1/**0 of the steel PEX-AL-PEX pipe’s, more suitable for hot water supply than metal pipe.
Hydraulic FunctionThe inner roughness of
ArdiPEX-AL-PEX pipeis 0.**7mm. The inner is
very smooth that makes Ardi pipe ideal for liquid (like water)
supply.
The diagram shows that Ardi PEX-AL-PEX tube will last you *0 years of operation under the set conditions and pressures. The forcing aging test by the Synthetic Materials Research Institute of Ministry of Chemical Industry has proved it as well.
PEX-AL-PEX InstallationFreely bent
by hand without tools, making the use of numerous fittings
unnecessary. Because of the metal/plastic composition, Ardi
PEX-AL-PEX tube remains in position after bending.
*5x*0 -6 m/m.k, only 1/8 of polyethylene pipe’s, almost same to aluminum pipe’s. The permanent bond of plastic layers to the aluminum considerably reduces heat expansion.
