FOB Price
Obtenir le dernier prix( Negotiable )
|Minimum Order
Localité:
China
Prix de commande minimale:
-
Commande minimale:
1 Set
Packaging Detail:
None
Delivery Time:
40-45days
Supplying Ability:
30 Set per Month
Payment Type:
T/T, L/C
Personne àcontacter Ms. Amber
No. 62 Sizhuangding Industrial Zone, Xinxiang, Henan, China, Xinxiang, Henan
Ring cutter:
Usage:
1. It will cut the whole tire into sidewall of tire and inner
circle.
2. Easy to operate and safety.
Productivity *0 Piece/h
Power 3KW
Adapt tire ********0mm
Dimensions ***0***0****0(mm)
Structual principle:
1. The device consists of frame, motor, reducer, transmission,
supporting frames, knife, tools and other components.
2. Knife is made from alloy and hard waer-resisting.
3. Motor and reducer connected by coupling, compact structure,
simple operation, easy maintenance.
Function:
1. It will separate the sidewall from the top of tire's connection,
so that tire sidewall and the top are completely separated.
Strips cutter:
Usage
1. It can cut all kind of tires, rubber sheets into strips.
Productivity *0 Piece/h
Power 4KW
Adapt tire ********0mm
Dimensions ***0***0****0(mm)
Structural principle
1. This equipment mainly consist of two blades, motor and reducer,
frame and transmission mechanism etc.
2. Knife with special materials, hard wear-resisting, can relapse
grinding use.
3. This equipment shear force, low energy consumption, use a low
speed, easy operation, safety.
Function
1. It will cut sidewall into wide of strips is **5 cm, and tire
circle reserved.
Rim cutter:
Usage:
1. It will cut the **5cm strips into 3.5cm tire block.
Productivity ***0KG/h
Power 7.5KW
Dimensions ***0***0****0(mm)
Structural principle
1. The device consists of frame, motor, transmission mechanism,
balance equipment, twomove knife and a fixed knife, and the
compression gear etc.
2. Knife is made from alloy, hard wearresistant, can be used after
repeatedly grinding.
3. Uniform speed of the device, shear force, low energy
consumption, easy operation, safety.
Steel wire separator
Usage:
1. It will separate the steel and rubber from tire circle mouth
parts.
Productivity *0 PCS/h
Power *1KW
Dimensions ***0***0****0(mm)
Structural principle
1. The device consists of frame, motor, reducer, transmission
machenism, communication and regulation of body roll and so on.
2. Dicth is made of alloy, roll, hard wearesistant, can be used
repeatedly surfacing repair.
3. This equipment has simple structure, high efficiency, low energy
consumption, strong practial, easy operation, safety.
Dynamic desulfurization tank
Usage:
1. Used to powder and softener, water activated chemical agents
placed in tank in continuous mixing, heat and chemical reactions in
confined under state of powder to desulfurization.
2. It has three heating manners like oil, stream and electric
heating
Suitable for reclaimed rubber factory.
Technical parameters:
Volume: 4 stere
Working pressure: 4.0MPa
Temperature: **0 degree
Capacity: ***0kg
Power: *5kW
Rubber mixing machine
Usage:
This machine is used for mixing the natural rubber, reckaimed
rubber mixing powder tablet and mixing after desulfurization. And
it is suitable for reclaimed rubber plant, conveyor facotry, rubber
products factory, shoe factory, cable plant, seals and other rubber
related industries.
Refining machine
Usage:
This machine is mainly used for refining of reclaimed rubber and
the strip, the refined rubber manchine mix refined rubber refine
rewinder, made of rubber board, suitable for reclaimed rubber
factory.
| Reclaimed rubber production equipment configuration table | ||||
| No. | Equipment | Power (Kw) | Function | |
| *1 | Dynamic desulfurization tank | *5/*8.5/*0 | Power and chemical materials placed in the tank and heated response to get desulfurization powder | |
| *2 | Rubber mixing machine | *0/*5/*0 | This machine main use to mix desulfurization rubber powder to rubber sheet | |
| *3 | Refining machine | *5/*5 | Mixing over the sheet of rubber to refine and make reclaimed rubber | |
| Notice: According to capacity select which model need | ||||
| Dynamic desulfurization tank technical parameters | ||||
| Volume | Working pressure | Temperature | Capacity | Power |
| 4 stere | 4.0MPa | **0 degree | ***0Kg | *5Kw |
| Rubber mixing machine technical parameters | ||||
| Model | Roll diameter* length(mm) | Roll ratio | Front roll speed (m/min) | Motor power (Kw) |
| XK***0 | **0****0 | 1: 1.**3 | *8.*2 | *0 |
| XK***0 | **0****0 | 1: 1.**3 | *4.*7 | *5 |
| XK***0 | **0****0 **0****0 |
1: 1.2 | *7.*3 | *0 |
| Refining machine technical parameters | ||||
| Model | Roll diameter* length(mm) | Roll ratio | Front roll speed (m/min) | Motor power (Kw) |
| XKJ***0 | **0***0 **8***0 |
1: 1.*1 | *5 | *5 |
| XKJ***0 | **0***0 **0***0 |
1: 1.**5 | *8.*8 | *5 |
