Fiberglass Reinforced Polyester(FRP) flat panel with clear color in
rolls are widely used in warehouse,greenhouse,steel
instructure,supermarket,kitchen and so on.The mainly specification
as bellows:
warranty year:above *5year
Glass Fiber: Adopting Taian high- quality
glass fiber, the content no less than *0%.
Unit Weight: ***0g/sqm ***0g/sqm
***0g/sqm
Nominal Thickness: 0.8mm, 1.0mm, 1.2mm
1.5mm 2.0mm, 2.5mm
Heat Resistance Limit: **0 to ***0
Light Transmittance: *5%( light green)
*3% (cream white)
Anti- ultraviolet Rate: *9.9%
Tensile Strength: **0Mpa
Flexural Strength: **0Mpa
Cracking Elongation Rate: 1.9%
Pasture Hardness: ≥ *0
Thermal Expansion Coefficient: 2.2X*0
*5cm/cm/
Thermal Conductivity: 0.*8W/m k
Warranty: *0 years
The Technical Standard of High-quality
FRP
1. Good tenacity. No cracking phenomenon
when driving nails in roof installation
2. Having close combining with color
steel plate. Cross- section thickness is uniform. The shape of FRP
is consistent with steel plate.
3. Transmittance loss rate is low. No
yellowing phenomenon after long term service.
4. Thermal expansion coefficient is close
to that of steel plate. No cracking and water leakage in nail
driving place because of expand with heat and contract with
cold.
5. Light through FRP assumes scattering
shape and gentle.
6. Bright and clean appearance, no
distinct air bubble and cracking on FRP.
7. Anti- ultraviolet and anti- chemistry
corrosion.
8. Anti- ageing and anti-
pulverization.
9. Long service life.
