FOB Price
Obtenir le dernier prix6.5 ~ 7.5 / Kilogram ( Negotiable )
|Minimum Order
Localité:
-
Prix de commande minimale:
Commande minimale:
100 Kilogram
Packaging Detail:
20kg/pail+20kg/pail, 200kg/pail+200kg/pail
Delivery Time:
within 3 days after getting payment
Supplying Ability:
8000 Kilogram per Day
Payment Type:
PayPal, Western Union, L/C, T/T
Personne àcontacter Ms. JoJo
Building A, No.3, Hongling First Road, Liulian Shibi, Pingdi Street, Long Gang district, Shenzhen, Guangdong
HY- E642 Â addition molding silicone is
generally named two-components silicone rubber, Part A and part B.
It features an exceptional fluidity and good operability.The mixing
ratio is 1:1,mainly be suitable for making molds application.
Â
Applications ofaddition molding silicone
ÂHY- E642 addition molding silicone could be mainly used for making concrete stones, precision molds, PU molds, resin molds, gypsum casting, candle molding,for life casting, fabric finishing, seal for electronic components and solar circuit board, trademark decoration. etc.
OPERRATING INSTRUCTION of HY-E642 addition molding silicone:
1. Stir part A and part B with right mixing ratio (1:1) evenly. And get the mixture for vacuum-pumping. (If there is no vacuumize , you can just pour the mixture slowly from the corner so that less bubbles caused)
Â2. Enclose the product (the original model) with four plastic plates or wooden plates.
Â3. Clean your products and brush a layer of release agent (detergent or soap water) on your product.
Â4. Pour the mixture with correct mixing ratio into the model frame.
ÂAfter about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .
Â
ÂSHELF LIFE: Twelve (12) months from date of
shipment when stored at 24℃ in
original unopened packages.
