Description
hand propelled thermoplastic road marking machine
Hand Push Marking Machine is one of the key machines for
thermo-melting coating marking. The marking quality depends on the
stability of machine frame and the operating range of marking
hopper, which reflect the difference in performance of machine.
TOP WAY TW-H Hand Push Marking
Machine in its new design, its wheel space wider, center of
gravity changed,shaft form renewed, so the machine body is lighter
and more flexible, reduced labor intensity,such problems as uneven
finishing mark edge and over operation are solved, and reduced
unstableness when marking zebra crossing.
Technical parameters
1. Outer dimensions:
***0mm***0mm***0mm
2. Total weight of machine:
**5kg
3. Capacity of glass bead box:
*5kg
4. Capacity of stirring tank:
**5kg
5. Coat thickness: 1.**4mm
6. Bead dispensing method: Gear
Driven, Automatically Clutch
7.Temperature maintenance of coating
material:******0
8. LPG cylinder norm: *5kg
9.Markingwidth:*0,*0,**0,**0,**0,**0,**0,**0,**0mm,the machine is
more suitable for marking **0mm zebra stripes.
Features:
1.More stable:
Through gravity adjustment, widened
front wheel, the Marking Machine is more stable than traditional
ones when marking **0mm zebra crossing.
2.Lighter:
Through repeatedly gravity test,
rechoose new shaft, the marking machine is much lighter, reduced
operator’s working intensity. So the marking works become easier
and more effectively.
3.Easy to operate:
Marking hopper’s operating range
minimized from **0mm to **0mm, more accurately , easier to control,
therefore such problems as slow hopper withdrawal and uneven
finishing mark edge are solved. A multi-point sliding block
pressing structure is used to avoid material leakage witch often
occurs to similar products due to the two tightly pressed sides and
large deformation in the middle of product alike.
4.Left Hand Road Marking
Machine
Ordinary Road Marking Machine places
its hopper on the right hand of the moving direction,while Left
Hand Road Marking Machine places its hopper on the left hand. It is
applied to High Way,closed roadway. And it also used for where
Thermoplastic Kneader melting the coating material at front,
several Road Marking Machine working towards to the same direction
at high speed, and where side line marking is required, then an
ordinary Right Hand Road Marking Machine and a Left Hand Road
Marking Machine should be working at the same time. Left Hand Road
Marking Machine also applicable to mountain road and slop road
marking, working together with Right Hand Road Marking Machine,
down to the slop, greatly reduced labour intensity.
hand propelled thermoplastic road marking machine