FOB Price
Obtenir le dernier prix600 ~ 1600 / Ton
|Minimum Order
Localité:
China hebei
Prix de commande minimale:
Commande minimale:
25 Ton
Packaging Detail:
25kgs in pp bag
Delivery Time:
20days
Supplying Ability:
600 Ton per Month
Payment Type:
T/T, L/C
Personne àcontacter Mr. shuangsuo
fudong, Handan, Hebei
|
Model |
Melt Index (MI) g/*0min |
Isotacticity % |
Tensile strength MPa (kgf/cm2) |
|
|
|
Blow |
***0 ***0 |
0.4 ~ 0.7 0.4 ~ 0.7 |
*6 ~ *8 *6 ~ *8 |
*5.5 *5.5 |
(**0) (**0) |
|
Injection |
***0 ***0 ***0 ***0 ***0 ***0 |
*0 ~ *4 2.5 ~ 4 0.8 ~ 1.4 *0 ~ *5 8 ~ *1 1.5 ~ 2.5 |
*5 ~ *7 *6 ~ *8 *6 ~ *8 *5 ~ *7 *5 ~ *7 *5 ~ *7 |
*5.5 *9.4 *8.4 *5.5 *3.5 *1.1 |
(**0) (**0) (**0) (**0) (**0) (**5) |
|
Thin filament |
***0 ***1 ***0 ***5 ***5 ***2 ***2 |
9.5 ~ *2 5.5 ~ 8.5 8.5 ~ *1 8.5 ~ *1 *2 ~ *4 2.0 ~ 3.5 1.2 ~ 2.0 |
*6 ~ *8 *6 ~ *8 *6 ~ *8 *6 ~ *8 *6 ~ *8 *6 ~ *8 *6 ~ *8 |
*0.4 *0.4 *3.5 *3.5 *1.4 *9.4 *8.4 |
(**0) (**0) (**0) (**0) (**0) (**0) (**0) |
|
Fiber |
***1 ***0 ***0 ***1 |
*2 ~ *5 5.5 ~ 8.5 2.0 ~ 3.5 4.5 ~ 6.5 |
*6 ~ *8 *6 ~ *8 *6 ~ *8 *6 ~ *8 |
*1.4 **4 *9.4 *0.4 |
(**0) (**0) (**0) (**0) |
1.Crystalline material, wet a small, vulnerable to the financial rupture, long and hotmetal
contacts easy to decompose.
2. Liquidity is good, but the contract scope and contract value of large, prone to shrinkage.
Dents, or distortion.
3.coolingspeed, pouring system and cooling system should be slow heat, and attention to
control the molding temperature, low temperature and high pressure when the material
easy to approach, the mold temperature below *0 degrees, the plastic is not smooth,
easy to produce poor welding, flow marks, *0 degrees or more prone to warpage.
4.plastic wall thickness to be uniform to avoid the shortage of rubber, sharp corners to
prevent stress concentration.
Anne
