Description
General
description:
The mesh welding line is
feed from wire coil and mesh out in mesh roll.
CE certificate
High efficiency
Pneumatic and cross wire
space auto-adjusted
Parameter:
Welded wire mesh machine is the
specialized equipment for wire mesh fence. This machine welds the
line wires and cross wires of the steel to be solid mesh in the
principle of multi-electrode resistance welding. It consists of
welded equipment, line and cross wires feeding device, mesh
stepping system, mesh laying and convey device, pneumatic system,
electrical control system and cooling system. The material can be
rolled ribbed steel wire, cold or hot rolled round steel
wire.
Its welding system is made up of the
rack, welding transformer, pressurized cylinder, upper electrode
combination, lower electrode combination, cross wire magnetic
locator, lift mesh unit, line wire bracket combination, pneumatic
system, water cooling system and others spare parts.
The welding system is designed for
smooth and ribbed wire
Welding strokes ranges from ****0 strokes per min
Main lower electrode combination
spacing is **0mm, *0 extra lower electrode combination set as spare
for the line wire spacing is **0mm.
Copper electrodes used are of good
quality
Cross wire: **8mm, pre-cut
Line wire: **8mm, in coil
Mesh width:
***0mm/***0mm/***0mm/***0mm
Welded no.: *0 or according to the
mesh width and mesh opening
Transformer: 8***5KVA
Line wire distance: **0,**0,**0
mm
Cross wire
distance: *****0 mm, Endless
adjustable
Max. welding
frequency: *0 Times/min
Pneumatic system pressure: more than
0.8 Mpa
Pressure of cooling water:
0.**0.4Mpa
Consumption of compressed air: more
than 4M3/min
Mesh tolerance: 2 mm/m
Dimension(L*W*H): *0*3.2*2. m
Total weight :
About *5T
