Micro-controller based Nurse Call Monitoring System Series 640

Description

 SYSTEM HIGHLIGHTS

Each call from each bed must be attended-
attended  within the time limit.
If not?
How to monitor  and fix-up responsibility.

To ensure the practice is followed, the system must be reliable and must have built in mechanism to point out delay in action.

Nurses Call Monitoring System series **0 informs the nursing staff the sequence of call  received thus minimizing any over due call. The call register maintains sequence in which call from different bed are received.

The first call pending is displayed with Big 2” 7 segment display. 4 other calls are displayed in the sequence of receipt. If more then 5 calls are pending, the same can be scrolled down. Any call attended is automatically erased and display is replaced with the next call pending.

If any call is pending beyond set time, the number starts blinking. it also activates a buzzer to draw attention of the nursing staff. If call remains pending even beyond 2nd limit, rate of blinking is intensified to bring notice of problem.

• Micro-controller based system

• Serial display of calls received
*1st call displayed with 2" Height LED
display, Next 4 calls in sequence on side
column, Further pending  calls- on
Scrolling 3 Digit 7 segment displays.

• Soft tone buzzer
- alerts receipt of new call

• Elegant look

• Compact and flexible
- Table- wall mountable.

• Built in Non Attendance Timer
- Pending calls flash
- Long pending calls flash at higher rates

• Modular Bed Side console
- Easy installation in std. Modular cabinet

• Status Indicators and buttons
- Ready, Call & Wait LED indication
on board, with Call & Reset switch

• Elegant patient remote  

• Low Voltage Operation
- The system works on *2 V. D.C hence  
patient is not put to danger even due to
accidental snatching of wires.

• Reset at patient bed
- re-set button installed near the patient.

• Compact and flexible
- The system requires very low space and
is flexible to accommodates up to *4 beds.

Next Generation System from
Industry Leader

Leaders in Nurses Call Monitoring System in India “BPS” team is presenting the latest technical innovation in the line.
The system is designed   by our in house team to suit Indian conditions.  

SYSTEM OVER VIEW

Series **0 consists of mainly the following sub-systems:

a)    Call station Board
b)     Patient Remote hand set
c)    Door indicator
d)    Toilet Pull Cord
e)    Master Controller Hub
f)    Nurses Monitor Console

Call Station Board

Each bed is provided with call station board. This is housed in standard console. It has push switches to call and re-set the call.                                                                                                                                    

LED indications for Ready(Green), Call(Red), and Wait(Yellow) are provided. Ready LED indicates that the system is ok and call can be made. If there is any problem with wiring, it will not glow. This is built in system to give instant check of any system or wiring fault.

LED marked Call lights up when the call is made. Once the call is made and it is registered with the controller hub, LED marked Wait glows indicating call has reached Nurse station.

Patient Remote hand set
From call station, remote Patient Hand Set is  provided so that the patient can make call form his bed.nnn
Remote hand set  has push to make call. LED indication for Ready, Call and Wait are provided.                    

Door indicator
Door indicator is installed out  side the room to indicate call pending in the room. This facilitates nursing staff to attend on way to Nurse Station. One Door indicator can announce pending call for
up to 8 beds   in the same room. Door indicators are available with many features like color LEDs,        hold switch etc.                                                                                                                           

Toilet Pull Cord:
Toilet Pull Cord with Indicator & Rope. Standard length of rope is 1.5m. This pull cord is installed in side the toilet. Patient can use the pull cord in toilet.

Master Controller Hub:
Controller Hub is central unit installed near Nurse  Monitor Console. It is consisting of one          
Micro-processor central Controller card, one connector card for up to *6 beds SMPS.
Wires from all beds are terminated on connector PCB. It receives information from
each bed and signals the Console to display the information.                                           

Nurses Monitor Console
The call monitor console will be installed at the Nurse center. Call received from any bed will be displayed by the respective bed number by 3 digit 7 segment LED display. It can be mounted on wall or table stand. The first call pending is displayed with Big 2” 7 segment display. Other 4 calls are displayed in the sequence of receipt. If more then 5 calls are pending, the same can be scrolled down.
Any call attended is automatically erased and display is replaced with the next call pending.

Connections:
Two  pair telephone cable will be required to connect each bed  to display board. Telephone type socket  is punched to wires from each bed. Mains supply of **0 V AC is required at Controller Hub.

Low voltage operation:
The incoming mains is converted to *2 V. D.C. in the Power Supply section and patient is not put to danger even due to accidental snatching of wires.

Re-set at patients bed:
To re-set, the nurse or attendant has to press a button installed near the patient. This ensures attendance.

Compact and flexible:
The system requires very low space and is flexible to add on as the number of beds increases. Marking on he indication board can be custom designed for easy location and is editable.

OUR EXPERTISE
Nurses call monitoring Systems and Queue Management Systems by team “BPS” is installed in all the leading hospitals in Eastern India.
With over *5 years of feed back from actual working condition in hospitals, continuous improvement in design, innovation of technology we are presenting Series ***-The most advanced Nurses Call monitoring System.
The system is designed with utmost reliability, dependability, safety, and flexibility in mind.