FOB Price
Obtenir le dernier prix28 ~ 58 / Kilogram
|Minimum Order
Localité:
Jiangsu
Prix de commande minimale:
Commande minimale:
1000 Kilogram
Packaging Detail:
In rolls and wound up tp the pipe core
Delivery Time:
10 days after 30% TT deposit
Supplying Ability:
300 Ton per Year
Payment Type:
T/T, L/C, Western Union, Money Gram
Personne àcontacter dolly
Liubao Industrial Zone, Yangzhou, Jiangsu
Polyimide FEP(F*6) film (similar to Kapton FN) is made of coating Polyimide film with FEP resin(F*6) on one side(FH) or double sides(FHF) and through the sintering process at high temperature, which combines the excellent properties of Polyimide film and FEP resin of high& low temp resistant, radiation resistant, corrosion resistant, excellent electrical properties, superior dimensional stability and heat sealable properties. It performs successfully in the wide range of temperature as low as ***2F(**0c) and as high as ***0F(***0c). Polyimide FEP(F*6) film (similar to Kapton FN) widely used for insulation in motor, electrical apparatus and wrapping of cable and magnet wire, heater manufacture etc.
Characters:
* Higher mechanical strength, better dielectric strength with thinner insulation ply;
* Excellent heat resistance ,used as class- H insulation and can work for a long term at
**0°C but short time at **0°C;
* Good flexibility, better tear resistance and excellent workability, and can be glued on the
different-sized workpieces;
* Self-sticking and good bonding strength , no removal after stripping off;
* Different thickness and width to meet customers’ specific requirements;
Application
Electrical and Electronics, circuit board manufactureH grade
electric engine, transformer coil and capacitor insulation wrapping
up in high-temperature, high-voltage conditionSMT thermal
resistance, golden finger protection of PCB boardHigh temperature
resistance and waterproof for electronic transformer
Specification
1. Other construction is available upon request; FEP layer thickness: 0.*1mm +/**0%
2. Width: *0 ~ **0mm; Core ID:*6mm; Roll OD:**0~**0mm
3. Min Qty: *0kgs each size in a lot.
Our Factory Competitive Advantages
Packing
The tape roll and disc should be rolled up on a pipe core whose internal diameter is about *6mm, and then the tape roll and disc should be packed into a plastic bag with good sealing, and then be transported into a wooden box with damp-proof paper or into a dry and clean carton.
