FOB Price
Obtenir le dernier prix9.5 ~ 15 / Kiloampere
|Minimum Order
Localité:
China
Prix de commande minimale:
Commande minimale:
200 Kilogram
Packaging Detail:
20kg/drum, 25kg/drum, 200kg/drum
Delivery Time:
within 3 days after confirming your bank reciept
Supplying Ability:
8000 Kilogram per Day
Payment Type:
T/T, L/C, Western Union
Personne àcontacter Ms. Yin
Liulian Shibi, Pingdi Street, Shenzhen, Guangdong
RTV silicone for LED encapsulation
HY****5 Electronic Potting Compound
Product Feature of encapsulation
silicone ***5:
HY****5# is a kind
of low viscosity, Inherent flame resistance, two components addtion
cured potting silicone with heat-conducting. It cures with both on
room temperature and heated temperature. It has the feature of the
higher temperature the faster of the curing time. It can be applied
to electronic components for insulation, waterproofing, fixed and
flame retardant. The flame retardant UL**-V0 level can be achieved.
It mainly applied in electronic components surface with materials
of PC(Poly-carbonate),PP,ABS,PVC, etc. and metal
materials.
Typical
Application:
HY****5# is
suitable for
- high powered electronics,
- DC/DC module and circuit board which requires heat dissipation and high temperature resistance.
It can be broadly used for LED screen, Wind Power Generator, PCB substrate, etc.
TECHNICAL
GUIDELINES:
1, Pls put part A and part B in separate container and stir evenly before mixing the two part together.
2, Weight Ratio: part A: part B = 1:1
3, Deaeration the mixture in vacuum pump under 0.*8 MPa for **5 minutes.
4, The temperature influences the curing time of HY****5#. When in too low temperature, we suggest customers appropriately heat the mixture to accelerate vulcanization. Suggested operation time and temperature. With temperature of *0~**0°C, the silicone will cure in *5 minutes, while in *5°C room temperature, the silicone will cure around 8 hours.
Warm Tips of RTV silicone for
electronic encapsulation:
1.The following material may hinder the curing of the product, So
pls apply after summary experiment. When necessary, pls clean the
application areas.
l Condensation silicone which not completely cured or organic tin compounds
l Sulphur, sulfide and sulfur rubber materials.
l Amine compounds as well as contains the amine materials.
l Pewters solder flux.
2. Should be sealed storage.The mixture should be used up at once, avoid causing waste.
3. Silicone belongs to non-dangerous goods, but keep away from mouth and eyes.
4. When it gets stratified after a period of storage, Please mix ***0 evenly before using, it does not affect the performance
Any further information pls feel free to contact with Ms Nina
