Description
Detailed Product Description
1. Rechargeable
2. Cordless
3. Magnet build in on the base
4. CE and Rohs Complaint
5.Additiaonl LED on the base
Features:
Cordless for practical use
Suitable for professional and DIY use
5 additional LED’s in the base
LED-High Luminous power (****0MCD)
Li-On 3.6V (***0mAh): Compared with NiMH-battery double life
time, no memory effect
Built-in magnetic holder
Retractable suspension hook
Up to 3 hours between charges
******0V AC adatper and *2V car adapter
Rubber-coated housing
TECHNICAL DATA – Power voltage – Power and IP as specified on
the model plate
POWER CONNECTION- Verify that the voltage of the battery
charger corresponds to that of the system. Use the lamp within
places prescribed and governed by current regulations on workplaces
and electrical systems. Check that the plug fitted on the cable is
suitable for the work environment; if it is not, it must be
replaced.
INSTRUCTIONS FOR USE – Plug into a suitable socket. Always
check that the device is operating efficiently and that it is not
affected by faults that could impair safety: do not remove the
guards. Do not open the device: maintenance must be performed by
skilled personnel only. The lamp is supplied with discharged
batteries. Connect the lamp to the battery charger. Don’t exceed
*4h recharge time to avoid battery damage. Do not disassemble the
battery charger neither the lamp: an improper assembling may imply
risks of malfunctioning or permanent damages. When recharging, both
the battery charger and the lamp would slightly warm up. This is
normal.
ACCESSORIES AND SPARE PARTS – Use only accessories and spare
parts approved by the manufacturer.
GENERAL PRECAUTIONS – The choice and the use of components
have been made taking into account the conditions of use and the
anticipated working life-span of the lamp. Install the lamp in such
a way as not to pose any hazard for exposed people, as long as it
is used correctly. No guards or signals will ever be enough unless
the user takes proper precautions, the lamp is kept in good
condition and the instructions below are precisely followed. Learn
how to use the lamp properly before starting any jobs. Make sure
the person using the lamp does so in a safe way and that he/she
knows how it works. Avoid exposing yourself or other people to
pointless risks. Do don’t remove, modify or disconnect THE SAFETY
DEVICES fitted by the manufacturer, but check that these are not
removed or that their efficiency has not been reduced. Keep the
work area free of any tools and any other unnecessary
objects.
WARRANTY – *4 months from the date of purchase – The warranty
covers any repairs or replacements, free of charge, in our factory,
of those spare parts that according to our indisputable judgment
show material or operating faults only. The warranty does not cover
any other form of indemnity. The replacement of repair of parts
subject to deterioration due to use (example: the battery pack) is
not covered by the warranty. Transport costs to be borne by the
purchaser. The warranty shall not apply in case of damage to the
device caused by negligent use.