Description
Specifications:
This Battery Analyzer is
made to test the condition of the automotive battery using the
latest battery testing technology. Unlike the conventional method
of draining the battery by applying resistance load and obtain the
result from the meter gauge. Also, it utilizes a series of pulsed
voltage across the battery cells and observes the AC current that
flows in response to it.
The benefits of this test
method are:
- Passive
testing method is safe.
- Never discharges or drain the battery.
- Able to test condition of discharged
battery.
- Consistent and repeatable results.
- Provides unique indication of battery
conditions.
Plus, it checks the Alternator’s charging and Starter’s cranking
conditions.
It is maintenance free and no
internal batteries required. It powers up when it is
connected to the battery posts during testing.
Key Features:
Simple and easy to use
- Test
batteries on and off the vehicle
- Accurate
results in milliseconds
- Battery
Life Analysis
- Analysis
Result: Good or Replace
- Large
easy to read LCD display.
- Test
results based on JIS, EN, DIN, SAE and IEC Standards.
- Check
Alternator charging conditions
- Check
Engine Starter conditions
Functions:
- Tested
Result Display: Good or Replace
-
Voltage Result Display
- Capacity
Display: Cold Cranking Amps (CCA), DIN, EN and IEC information
relative to battery rating.
- Internal
resistance value (mΩ)
- Life in
percentage (%)
Applications:
Use to test a wide range of *2V batteries Starting (SLI), Deep
Cycled and Marine or Wet (Flooded), Valve-Regulated lead-Acid
(VRLA) or Maintenance Free (MF), Sealed Maintenance Free (SMF),
Absorption Glass Mat (AGM) and GEL cell. The major battery
standards such as: JIS, SAE, EN, DIN and IEC are
supported.
OperatingParameters:
System voltage
: *2 Volts
Input voltage range :
9V~*5V
Power
requirement : No internal batteries
required. Power on when hooked up during testing
Testing
range
: **0~***0 CCA, **0~***0 DIN, **0~***0 IEC,
**0~***0 EN
Test
Time :
Less than 5 seconds
