Sell PP, PE, LLDPE, HDPE blow molding grade By Xuzhou Huanhai Chemical Technology Co., Ltd., China

Sell PP, PE, LLDPE, HDPE blow molding grade

FOB Price

( Negotiable )

Minimum Order

Localit�:

China

Prix de commande minimale:

Commande minimale:

10 Ton

Packaging Detail:

25 kg/pp bag

Delivery Time:

2~3weeks

Supplying Ability:

1000 Ton per Month

Payment Type:

T/T, L/C

Name	PE
Type	Blown film	Drawbench	Injection molding
Melt flow rate g/*0min	0.**1.2	0.**1.0	6.**8.0
Density g/cm3	0.**0.2	0.**0.4	0.**0.2
Haze %≤	*3
Tensile Strength Mpa ≥	8.3	*2	*7
Elongation At Break% %≥	**0	**0	**0
TensileStrength at break Mpa≥	*7
IZODImpactStrength(notched) ≥J/m		**0	*9
Hardness Shore D≥			*1
Purpose	Films,mulch,tubing...	All kinds of Monofilament and rope…	All kinds of plastic

Category (PP)		Film; material flow	All gather note plastic	Tube Materials	Erosion-resisting Copolymer Plastic	Fiber Materials
Grade		Qualified	Qualified	Qualified	Qualified	Qualified
Apperarance	Black granule	≤8	≤8	≤8	≤8	≤5
Apperarance	Color granule	≤*0	≤*0	≤*0	≤*0	≤*0
Melt fiow rate (MFR) G /*0MIN		6.0*1.4	5.7*1.4	0.***0.6	0.4*0.2	3.2*0.9
Strain at break MPa		≥*5	≥*0	≥*3	≥*1	≥*8
Flexural modulus MPa		≥**0	≥***0	≥**0	≥**0	≥***0
IZOD Impact Strength(notched) KJ/M2		≥4.0	≥2.5	≥3.0 (**0°C)	≥4.0	≥3.2
Soften Temperature °C		According to the measured value	≥ **0	≥**5	≥**1	≥**0
Rockwell Hardness R		According to the measured value	≥*0	≥*0	≥*5	≥*5
Application		Single-layer film and Double layer membrane	House wares, Crates,Garden facilities, Stadium Seats, Industrial Parts	Hot water pipe and Cold water pipe	In the molding parts of the car as tube material and sheet material	Pack-rope, Artifical turf ,strapped rope and Carpet lining

Type (PVC)	SG3	SG5
Viscosity,ml/g(or K value)	****7(1)******0	****7(6)******0
Number of Impurity Partical max.	*0	*0
Volatiles Content%, max.	0.*0	0.*0
Appearing Density, g/ml, min.	0.*2	0.*2
Number of Grain/**0cm2 max.	*0	*0
Plasticizer Absorbency Value of **0g Resin	*5	*9
Whiteness %, min	*4	*4
Water Extractant Solution Conductivity, s/m max	0.**5
Residule Chlore Thylene Content, mg/kg, max.	5	5
Ethylidence Chloride mg/kg max.	**0	**0

Sell PP, PE, LLDPE, HDPE blow molding grade