Description
The principle part of QC*2K series NC hydraulic pendulum plate
shear is composed by machine frame, knife beam, material pressing
device, safety device, front feeding device, front supporting
device, ruler, back gauge, stepless regulation device, hydraulic
system and electric equipment system. And the machine frame is
composed by worktable, life and right posts, oil tank and so on.
The total frame is distributed reasonably.　
Both the machine frame and knife beam of QC*2K series NC hydraulic
pendulum plate shear adopt armor plate welding structure. The
primary holes and combined sides adopt large-sized metal cutting
machine tool and perfect technique to guarantee precision. The
hydraulic transmission, pendulum structure and NC control can meet
various processing requirements for feeding and cutting.　　
QC*2K series NC pendulum plate share adopts nitrogen lifting
cylinder. The pressure foot is clamped with hydraulic pressure. The
safety device before pressure foot is easy for viewing the process
of cutting.　The knife beam and pressure foot of QC*2K series
hydraulic pendulum plate shear acts in order; and the pressing
force is increased along with the increasing of cutting force.　It
has the functions of stepless regulation between blades for getting
needed clearance conveniently and quickly.　Particular pre-pressed
light is convenient for pressing, alinement and cutting in
steps.　　
The high-quality narrow long plate can be cut into strips less than
the thickness of plate, which saves much material.　　
The back gauge lifts up automatically at the maximum distance for
cutting super long plate conveniently
