Description
Throughing idler: Used to conveying loose materials at carrying
section.
Flat idler: Flat carrying idlers are used to conveying bulk
materials; Flat return idlers are used to support belt at return
section.
Aligning idler: Used to adjust belt running, prevent deviation.
Front trough idler can make self aligning during operation as
well.
Impact Idler: The installation position is under the material
filling section. It can minimize the impact force on the belt, and
prolong belt useful life.
Return idler: Used to support belt at return section. Three types
are available: Flat return idler, V-shape return idler, and revert
V-shape return idler. Both V-shape and revert V-shape return idler
can effectively prevent belt deviation.
Stable operation, small runout, lightly shake, low noise, reliable
quality are their characteristics.
Idler rotated smoothly, the friction force is slight. Energy saving
is also a main characteristic. Idler rotate friction factor (f/)
varies with different idler diameters and shaft apertures. (f/)
always under 0.*1. Considering of other conditions during
operation, the dynamic force is calculated with friction factor
(f/).
Excellent materials, permanent lubrication and long useful life.
All materials used in idler production are with good quality.
Bearings and seal rings are life seal by inner-lubricated.
Lubrication grease should not be added in usage.
Multi-channel labyrinth seal is adopted to prevent dust and water.
Various types of bearing pedestal and sealing structure are
available for uses'selection.
