Description
ST-PMS-R Reflected Marking Tape
Key component: Flexible polymer, pigment, glass beads
Commonly used color:
1. White; 2. Yellow; 3, Black; 4; Blue; 5, Red; 6, Orange; 7,
Green; 8, Brown
Model: ST-PMS-R-I (Ordinary type)
It is?not self-adhesive.?Primer needs to be?applied to both?tape’s
backing and?pavement surface before installation.
Model: ST-PMS-R-II (Gum type)
It is self-adhesive. Primer needs to be?applied to?pavement surface
only?before installation.
Specs:
The permanent marking tape rolls are designed to stripe asphalt
parking lots, roads, bike paths and any other area where the road
will subject to heavy traffic flow and high visibility delineation
is needed. It is excellent product for creating crosswalks, road
lines, arrows, words, symbols, preformed pavement markings, logos,
3D markings, pipe marker label etc.
The product is reflective and will remain on road surface 4 times
longer than ordinary paint, and the most important is, you can
apply it all by yourself, No special equipment needed.
It is applicable to various pavement surfaces of concrete, asphalt,
marble.
Life: 2 years but depends on the road conditions, traffic flow and
proper installation.
?Model Width (mm) Length
Thickness Weight
(±*0%) Package
ST-PMS-R-I ?5,*0,*5,*0,*0,*5,**0
*0m? ? 1.**1.8mm
2.2kg/sqm **0***0***0mm
ST-PMS-R-II 5,*0,*5,*0,*0,*5,**0
*0m 1.**2.2mm ?2.4kg/sqm
**0***0***0mm
